Installation Instructions

83
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016
Version 2, 06.08.2010
¤ Save an access code and specify when the phone numbers should be automatically
prefixed with the digits. You can choose between Always, Never
For net directories (only when selecting from an online directory),
For call lists (only when dialling from the call list or an answering machine list),
For net directories and call lists.
¤ Enter the maximum number of digits for your internal telephone numbers. This will
prevent the access code also being prefixed for internal calls.
¤ Click on Set to save your settings on the page.
Activating the area code for local calls using VoIP
On this page, you provide details about the location of your phone. These are used to
determine the international and local area dialling codes as well as country-specific tones
(e.g., dialling tone or ring tone).
Settings
¢ Management ¢ Local Settings
Area Codes
If you use VoIP to make a call to the fixed line, you may also have to dial the area code for
local calls (depending on the provider).
You can set your phone so that the access code is automatically predialled when any VoIP
call is made in the same local area, and also for national long-distance calls. This means
that the access code is set before all phone numbers that do not start with 0 – even when
dialling numbers from the directory and other lists. The exceptions are numbers for which
a dialling rule has been defined.
¤ Select your country. The international and national prefix is then entered in the Prefix
and Area code fields. You can change these settings if required.
¤ Specify the type of calls (local and national calls) to which the settings are to apply.