Installation Instructions

94
Configuring the system on the DECT Manager
Gigaset N720 DECT IP Multicell System / engbt / A31008-M2314-L101-6-7619 / web-conf.fm / 29.08.2016
Version 2, 06.08.2010
Examples:
Directory via XML Protocol
If a corporate directory is provided via an XML server, you will need the access data to set
it up.
¤ Enter a name in the Directory name field. This is the name under which the directory
will be displayed on the handsets.
¤ Enter the XML server details.
Enable private online directory
¤ If a private directory is available on the server in XML format, activate it and enter a
name for the directory. The private directory must be provided via the same server as
the XML directory.
Saving settings
¤ Click on Set to save your settings on the page.
AND operation: (& (givenName=%) (mail=%))
Searches for entries in which the first name and mail address begin
with the characters entered by the user.
OR operation: (| (displayName=%) (sn=%))
Searches for entries in which the display name or surname begins
with the characters entered by the user.
Combined
operation:
(|(& (displayName=%) (mail=%))(& (sn=%) (mail=%)))
Searches for entries in which the display name and mail address or
the surname and mail address begin with the characters entered by
the user.
Note
Detailed information about LDAP configuration can be found at
¢ wiki.gigasetpro.com
Server address IP address for the directory.
Username Access ID for the directory.
Password Password for the access ID to the directory.