Operation Manual

Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / introduction.fm / 12/4/18
Template Module, Version 1.2, 11.09.2018
N870 IP PRO Multicell System – Introduction
5
N870 IP PRO DECT manager
Management unit for a group of base stations. At least one DECT manager must be used for
each installation.
The DECT manager
Manages bases station synchronisation within the clusters
Provides application gateway between SIP signalling and DECT signalling
Controls the media path from PBX to relevant base stations
Configuring DECT managers page 28
N870 IP PRO DECT base stations
Provide cell site DECT functions
Provide media processing from handset directly towards PBX
Provide connection channels for the handsets, the number depends on various factors
such as the approved bandwidth and the device role
Configuring the base stations page 37
Handsets (mobile devices)
Per DECT manager up to 250 handsets can be connected. To allow inter-DECT-manager
roaming, the regular load of handsets planned to be attached to one DECT manager
should be lower (approx. 80 %).
60 DECT calls could be made simultaneously for VoIP calls, network directory sessions
and info center sessions. For information on handset functions in relation to Gigaset base
stations, visit wiki.gigasetpro.com
.
Subscribers can accept or initiate calls in all DECT cells with their handset (Roaming), and
can also switch between the DECT cells during a call (Handover). A handover is only
possible if cells are synchronised.
Configuring handsets page 57
Detailed information about approved Gigaset handsets can be found in the relevant user
guide. These are provided on the Internet at wiki.gigasetpro.com
.
PBX (Private Branch Exchange)
You need to connect your DECT telephone system to an IP PBX or Provider with VoIP
(SIP)connections, e.g.,
On premise PBX
Hosted PBX
Cloud PBX
VoIP Provider
The PBX
Establishes the connection to a public telephone network
Enables central management of telephone connections, directories, network mailboxes