Operation Manual

Template Module, Version 1.2, 11.09.2018,
Provider and PBX profiles
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings_provider.fm / 12/4/18
50
Provider and PBX profiles
Only available in the Integrator user interface.
You can use up to ten different VoIP PBX or VoIP provider profiles, e.g.
• your company's VoIP PBX
• and/or public providers from which you have requested VoIP services.
This page allows you to create a list of systems providing VoIP connections and other services for
your phones.
¤ Settings Provider or PBX profiles
The page lists the available VoIP connections.
Configuring provider and/or PBX profiles
¤ Click on next to the name of the VoIP connection you want to edit . . . the provider/PBX
configuration page is opened ( page 50).
Configuring provider or PBX profiles
On this page you can edit the data for the selected provider or PBX profile.
Connection name or number
¤ Enter a name for the provider or PBX profile. This name is shown in the Provider/PBX list. To
distinguish between different connections it should specify the respective VoIP service
provider.
Phone system
System
¤ Select the type of PBX you use for VoIP provisioning from the option menu.
General provider data
Domain
¤ Enter the domain part of the user address (SIP URI). Together with the phone‘s user name it
is used to build the Address Of Record (AOR) or to build a destination out of the dialed
number.
Examples:
Name The name that you have defined for the connection is displayed, or the default name
(IP1 - IP10). It can be edited ( page 50).
Domain Domain part of the user address. In the case that a connection is not used Not
configured is displayed.
sip.domain.net for [e-mail]
10.100.0.45 for 02871913000@10.100.0.45