Operation Manual

Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings_provider.fm / 12/4/18
Template Module, Version 1.2, 11.09.2018
Provider and PBX profiles
55
RTP Packetisation Time (ptime)
Length of time in milliseconds represented by the audio data in one packet.
¤ Select the size of RTP packets to send. Select between 10 / 20 / 30 ms.
Signalling options for 'Hold' in Session Description Protocol (SDP)
Call hold means that a user requests to put an active call on hold. The holding part sends a
re-INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP
offer contains the attribute line a=inactive or a=sendonly.
¤ Select which attribute should be sent in the SDP offer:
Hold towards Transfer-Target
The device enables call transfer after consultation or without consultation.
¤ Define, whether a consultation call with transfer target is put on-hold prior to the execution
of the call transfer (Ye s) or not (No).
Display of caller information
¤ From the Calling Party (User Part) option menu select which information is allowed to be
transferred to the receiving part within the SIP header. Which information is actually trans-
ferred is determined by the provider.
Service Codes
Service codes are key sequences provided by the provider or PBX in order to activate/deactivate
specific functions on the handset. You can set the adequate service codes for activating/deacti-
vating CCBS and CCNR.
¤ In the text fields Call Completion on (CCBS, CCNR)/Call Completion off (CCBS, CCNR) enter
the key sequence for activating/deactivating CCBS and CCNR.
inactive The SIP endpoint would neither send nor receive data.
sendonly The SIP endpoint would only send and not receive data.
FROM Only the FROM information can be added.
Caller identity in the form number@server, e.g.:12345678@192.168.15.1
PPI+FROM P-Preferred-Identity (PPI) or FROM can be added
The P-Preferred-Identity header field is used from a user agent to a trusted
proxy to carry the identity the user sending the SIP message wishes to be
used for the P-Asserted-Header field value that the trusted element will
insert.
PAI +PPI+FROM P-Asserted-Identity (PAI) or PPI or FROM can be added
The P-Asserted-Identity header field is used among trusted SIP entities
(typically intermediaries) to carry the identity of the user sending a SIP
message as it was verified by authentication.
CCBS (Completion of Call to busy Subscriber) Ringback if busy
CCNR (Completion of Calls on No Reply) Ringback if no answer