User manual

Maxwell 10 / en / A31008-N4001-R102-1-20 / web_configurator.fm / 22.01.2014

Network and connectors

Template A4, Version 1, 03.04.2012

¤ Select the required priorities for voice and data transmission for the LAN port from the Voice Pri-

ority and Data Priority menus.

¤ If you selected LAN and PC Port, select the VLAN Priority for the transmission of PC data as well.

Prioritising VLANs

Data packets from VLANs can be prioritised. The priority determines whether the data traffic from a

VLAN is given preferential treatment by the network components. You can define the priority for

voice and data separately. In the case of a local network with a lot of data traffic, you can achieve bet

ter quality phone connections by giving a high priority to voice data. Using a high priority for data

services you can achieve better quality for displaying info services such as webcam images or maps.

Range of values and assignment of values to service classes (according to IEEE 802.1p):

¤ Select one of the following options for Use

VLAN tagging:

No If you are not using a VLAN (default).

LAN Port only

If you are operating the phone and PC in the

same VLAN.

LAN and PC Port

If you are operating the phone and PC in dif-

ferent VLANs.

¤ Enter the VLAN identifier for your virtual

network in the VLAN Identifier (1..4094)

field.

When selecting LAN and PC Port, enter the

different VLAN identifiers under VLAN LAN

Port and VLAN PC Port.

Value range: 1 – 4094

If you enter the wrong value for VLAN Identifier (1..4094), you will need to restore the

phone to the default settings:

¤ Settings Backup & reset Factory data reset.

You will then need to reinstate the phone's access to the local network ( p. 9).

0 No priority (Best Effort)

1 Background services, e.g., news ticker (Background)

2 Not defined

3 General data services (Excellent Effort)

4 Control services, e.g., routing (Controlled Load)

5 Video

6 Voice data (Voice)

7 Top priority for network control software (Network Control)

Further options for optimising the voice quality are available under QoS settings

(Quality of Service)£ p. 17.