Operation Manual

14
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Phone settings
Gigaset A116 / LUG GR-MEA-International en / A31008-M2801-R101-1-8N19 / operating.fm / 7/27/16
Advanced settings
Operation with a router
When operating on the analogue connection of a router, echoes potentially occurring can be
reduced by enabling Echo mode. If there are no problems with echoes, this function should be
deactivated.
¤ MENU Settings OK Base OK Additional OK Echo mode OK
( = enabled)
Operation with a PABX
The following settings are only necessary when your PABX requires them; refer to the PABX user
guide. Enter the digits slowly one after the other.
Changing the dialling mode
¤ MENU The digit for the dialling mode set flashes:
0 = Tone dialling (DTMF); 1 = Pulse dialling (PD) Enter digit OK
Setting the flash time
¤ MENU The digit for the current flash time flashes:
0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms;
7 = 800 ms Enter digit OK
Changing pause after line seizure
You can set the length of the pause inserted between pressing of the Talk key and sending
of the call number.
¤ MENU The digit for the current pause length flashes:
1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec. Enter digit OK
Changing pause after Recall key
¤ MENU The digit for the current pause length flashes:
1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms Enter digit OK