Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / title.fm / 4/4/12 Congratulations By purchasing a Gigaset, you have chosen a brand that is fully committed to sustainability. This product’s packaging is eco-friendly! To learn more, visit www.gigaset.com.
Version 5, 23.09.2008 Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / title.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / security.fm / 4/4/12 Safety precautions Warning: Be sure to read this user guide and the safety precautions on the CD before using your telephone. Explain their content and the potential hazards associated with using the telephone to your children. > Use only the supplied power adapters, as specified on the back of the base or charger. Use only the cables supplied for fixed line and LAN connection and connect these to the intended port only.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / Pack_Content.fm / 4/4/12 Package contents 1 2 8 4 7 6 5 Version 5, 23.09.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / overview_handset.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / connect_overview.fm / 4/4/12 Connection overview 6 5 1 Version 5, 23.09.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / install.fm / 4/4/12 Preparing the handset 1 Inserting the supplied batteries and closing the battery cover > Check the polarity when inserting the batteries (see symbols in or on the battery compartment). > Use only the rechargeable batteries recommended. Once the batteries have been inserted, the handset switches on automatically. > First insert the tabs on the top of the A battery cover in the recess on the housing A .
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / install.fm / 4/4/12 Connecting the base 3 Connecting the phone cord and power lead to the base B A Insert the (flattened) phone cord into the lower connection socket at the rear of the base. B Insert the power lead of the power adapter into the upper connection socket at the rear of the base. C Insert both cables into their respective cable recesses. A C Use only the supplied phone cord and the supplied power adapter.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / install.fm / 4/4/12 Connecting the base 5 Connecting the base station to the router (Internet) Data protection notice When the device is connected to the router, it automatically contacts the Gigaset support server to make it easier for you to configure the devices and to enable communication with the Internet services.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / install.fm / 4/4/12 Connecting the base 6 Connecting the PC to the router (optional) You can change the settings on the phone's base using a PC connected to your phone via the router. > Connect the PC network connection to a free LAN socket on your router. Version 5, 23.09.2008 The procedure below requires that your phone is automatically assigned an IP address by the router (i.e., DHCP is enabled on router and phone). In exceptional cases (e.g.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Configuring the VoIP connection Instead of using the following procedure, you can also enter the VoIP access data and the assignment of the VoIP connection as send and receive connection using your PC (steps 7 to 12 ): > Launch the Web browser on your PC. > Enter the URL www.gigaset-config.com in the address field of the web browser and press the return key. You are connected to your base's Web configurator.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Configuring the VoIP connection 7 Starting the configuration process When your handset is sufficiently charged (approx. 20 minutes after you have placed it in the charger), the message key f on the handset flashes. > Press the message key f on the handset. If "New firmware available" is shown in the display, updated firmware is already available for your phone. Press the right-hand display key §Yes§.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Configuring the VoIP connection The configurable IP connections are shown in the following displays (IP 1 to IP 6). VoIP connections that are already configured are marked with ³. IP 1 ³ Back OK > If necessary, press down on the control key w to select a connection. > Press the §OK§ display key to continue. Provided that your phone is set for auto-configuration (default setting), you will see the following display.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Configuring the VoIP connection 9 Entering an auto-configuration code Enter auto > Enter your auto-configuration code using the keypad conf. code: > Press the right-hand display key §OK§. 5 All data required for VoIP telephony is loaded directly from the Internet to your phone. Following successful download, IP account is registered is shown in the display. Proceed as described under 12 . Del. 10 (max.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Configuring the VoIP connection 11 Entering personal VoIP account data > To switch between upper and lower case and digits, press the # key (several times if necessary). > Characters entered incorrectly can be deleted using the left display key below §Del.§. The character to the left of the cursor is deleted. > You can navigate within the input field using the control key w (press right/left).
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Assigning the send/receive connection 12 Launching the connection assistant To call other parties using the newly configured VoIP connection (e.g., IP 1), you must assign the connection to one or more of the registered handsets as a send connection. Default assignment: The VoIP connection is assigned to every registered handset as a receive connection (incoming calls can be received).
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Assigning the send/receive connection d. Receiv.calls for: Phone f Yes Back g V OK > Press down on the control key w to switch to the next connection. Select either Yes or No as described above. > Repeat the steps for each connection. > Press the display key §OK§ once you have finished configuring the settings for the handset. The updated list of receive connections is displayed one more time for you to check.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Assigning the send/receive connection Instead of a fixed connection, you can also select Select at each call. Each time you make a call, you must then select the connection you wish to use. You can go on to start the connection assistant for each additional handset registered to the base. The following is displayed in sequence for each handset: Assign connect. to INT1? > Perform steps a. to f.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12 Gigaset.net directory entry Entering names in the Gigaset.net directory Gigaset.net* is a VoIP service provided by Gigaset Communications GmbH, which you can use to make free calls to other Gigaset VoIP users across the world. Every Gigaset.net subscriber can create an entry with a name of their choice in the Gigaset.net online directory. Follow the steps below, if you wish to create and entry in the Gigaset.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / telephony.fm / 4/4/12 Making calls Making calls > Enter a phone number using your handset's number keys. Please note that, even with local calls, you must always dial the area code for calls via VoIP (provider-dependent). You have assigned the handset a fixed send connection (default assignment: fixed-line connection): > Briefly press the talk key c. The number will be dialled via this send connection. Or > Press and hold the talk key c.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / CC.fm / 8/16/13 Customer service & product warranty Australia and New Zealand IMPORTANT Please retain your sales receipt as proof of the date of purchase. Customer Service If you require assistance in operating this product please contact us AUS: 1300 780 878 or by e-mail at the Customer Care section of our website at www.gigaset.com/au NZ: 0800 780 878 or by e-mail at the Customer Care section of our website at www.gigaset.
Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / CC.fm / 4/4/12 Customer service & product warranty If it is necessary to have the product serviced, the customer service representative will inform you of the product return process. If it is necessary to have the product serviced under warranty in both Australia and New Zealand you will need to return the product to your place of purchase.
Version: 21.08.
