Operation Manual

Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / configuration.fm / 4/4/12
Version 5, 23.09.2008
15
Assigning the send/receive connection
The connection selected here is used as the standard send connection on this handset if you briefly
press the talk key c after entering the number.
d.
> Press down on the control key w to switch to the
next connection. Select either Ye s or No as described
above.
> Repeat the steps for each connection.
> Press the display key §OK§ once you have finished con-
figuring the settings for the handset.
The updated list of receive connections is displayed one more time for you to check. Press the
display key §OK§ to confirm the assignment.
e.
The send connection currently set for the handset is
displayed: Phone.
> Press the display key §OK§ if you do not wish to change
the setting. Skip the following step.
> To change the setting, press the display key §Change§.
f. Which connection/phone number should the handset
use to make a call:
> Press right on the control key w repeatedly, until the
required connection is displayed (in the example,
IP1).
> Press the display key §OK§ to save the settings.
Receiv.calls for:
Phone
f
Yes
g
Back
V
OK
INT 1
send calls via:
Phone
Change OK
INT 1
send calls via:
f
IP1
g
Back OK