Operation Manual

Gigaset A510 IP / Australia / A31008-M2230-C401-1-7643 / install.fm / 4/4/12
Version 5, 23.09.2008
5
Preparing the handset
Inserting the supplied batteries and closing the battery cover
Connecting the charger and charging the batteries
> Check the polarity when inserting the batteries
(see symbols in or on the battery compartment).
> Use only the rechargeable batteries recom-
mended.
Once the batteries have been inserted, the handset
switches on automatically.
> First insert the tabs on the top of the
battery cover in the recess on the
housing .
> Then press the cover until it clicks
into place .
> The display is protected by a plastic film. Please remove the protective film!
> Place the handset in the
charger and wait until
the batteries are fully
charged (approx.
6.5 hours).
> Do not put the handset back in the
charger until the batteries are fully dis-
charged through use.
> After the first battery charge and dis-
charge, you may place your handset in
the charger after every call.
> The battery charging status is displayed
in the idle display: = e V U
(empty to full).
1
A
B
B
A
2
> Observe the sequence (A, B)!
B
A
6.5 h