User Guide

150
FCC / ACTA Information
Gigaset A510IP / USA en / A31008-M2230-R301-2-6019 / appendix.fm / 09.10.2012
Version 4, 16.09.2005
Checking service information
If you contact Customer Care, you may need the base's service information.
Prerequisite: You are trying to establish an external call or are conducting an exter-
nal call.
§Menu§ ¤Service Info
Confirm selection with
§OK§.
You can select the following information/functions with q:
1: Serial number of the base (RFPI)
2: IPUI (International Portable User Identity) of the handset used
3: Informs the service employees of the base settings (in hex diagram),
e.g., the number of registered handsets.
4: Variant (digits 1 to 2),
Version of the phone's firmware (digits 3 to 5).
5: Gigaset.net number of your phone. A service employee can use this
number to call you over the Internet without you needing to be regis-
tered with a VoIP provider. This means that the employee can test
online connections and VoIP telephony regardless of the VoIP provider.
6: Device number of the base. This contains additional information for
the service employee.
Unlock system
(only if the device has been locked by the provider)
Confirm selection with §OK§.
If necessary you can unlock a provider-specific device lock with a cor-
responding code.
Update profile
Confirm selection with
§OK§.
Your current VoIP provider profiles (general provider data for all config-
ured VoIP connections) are automatically loaded onto your phone. The
general settings for all VoIP connections for which profiles are available
on the Internet are updated.
Send config.
Select this option only if you are requested to do so by the service
employee.
Please note
You may need to wait a few seconds before §Menu§ appears on the display