User Guide

Making calls

Gigaset A510IP / USA en / A31008-M2230-R301-2-6019 / telephony.fm / 09.10.2012

Version 4, 16.09.2005

If your VoIP provider does not support the dialling of IP addresses, each part of the

address will be interpreted as a normal phone number.

Dialling emergency numbers

Dialling plans for emergency numbers (e.g., the local police emergency number;

¢ page 92) are preset on the phone for certain countries. Emergency calls are

then always made via the fixed line.

However, you can change the connection through which each emergency number

should be called (e.g., if the phone is not connected to the fixed line). You must

make sure, however, that the VoIP provider for the selected connection supports

emergency numbers. If the VoIP connection is deleted from the configuration, the

emergency call can no longer be made.

If no dialling plans for emergency numbers are preset on your telephone, you

should set dialling plans yourself. Assign them to a connection that you know sup-

ports emergency numbers. Calls to emergency numbers are always supported by

fixed lines.

Please note: If no dialling plans are defined for emergency numbers and you have

programmed an automatic local area code, the code will also be prefixed to emer-

gency numbers as soon as they are dialled via a VoIP connection.

Displaying the phone number you are calling (COLP)

Prerequisites:

u Your network provider supports COLP (Connected Line Identification Presenta-

tion). You may need to activate COLP with the provider (ask your provider about

this).

u The called party has not activated COLR (Connected Line Identification Restric-

tion).

For outgoing calls, the phone number of the connection on which the call is

received is displayed on the handset.

The displayed number may differ from the number you have dialled. Examples:

u The called party has activated call divert.

u The call is answered by another connection within a PABX system.

If there is an entry in the directory for this phone number, the corresponding name

will be displayed.

Ending a call

a Press the end call key.

Please note

u The actual number of the connection you have reached (or the assigned

name) is displayed instead of the called number during call swapping, con-

ference calls and consultation calls.

u When the phone number is copied to the directory and the redial list, the

dialled number (not the displayed number) is copied.