User Guide

First steps

A58H / USA EN / A31008-M2055-R301-1-6019 / starting.fm / 06.07.2010

Version 4, 29.10.2007

Registering the handset to the base station

Before you can use the phone, you must first register the handset to the base sta-

tion. The actual registration procedure will depend on the type of base station.

Automatically register the handset to the Gigaset A580/A585

base station

Manually registering the handset

You must activate manual registration of the handset on both the handset (1) and

the base station (2).

1) On the handset:

§Menu§ ¢Settings ¢Handset ¢Register Handset

(If you require further information on the illustration of these operating steps,

please see

¢ page 17.)

~ Enter the system PIN of the base station (the default is 0000) and press

§OK§.

2) On the base station:

Within 60 sec. press and hold the registration/paging key on the base station

(approx. 3 sec.).

Handset is

registering

¤ Place the handset with the display facing up

in the base station.

The handset registers automatically.

Registration can take up to 5 minutes.

Do not remove the handset from the base station dur-

ing this time.

Insert handset

into base

Please note

u Each key press interrupts the automatic registration.

u If automatic registration does not work, the handset will have to be regis-

tered manually.

u The handset must be registered manually to an A580 IP base station.

Handset is

registering

The registration screen is displayed.