Operation Manual

27
Gigaset C430-C430A / LUG - UK-IE / A31008-M2502-L101-1-7619 / settings.fm / 5/14/13
Template Borneo, Version 1, 21.06.2012
Adjusting the telephone settings
Setting the display backlight
The display backlight is always lit when the handset is not in the base/charging cradle or when
a key is pressed. Any digit keys pressed appear on the display for pre-dialling.
You can also activate/deactivate the display backlight for idle status:
v
¤ Ï ¤ OK ¤ q Display ¤ OK ¤ q Backlight ¤ OK
In Charger: r On / Of
f
Out of Charger: r On / Of
f
¤ Save
Activating/deactivating Message key flashing
Specify whether receipt of new messages should be displayed on the handset by the message
LED.
¤ In idle status: v ¤ *#Q5#
The display shows the number 9.
¤ Press the following keys to select the type of message:
You will see the number 9 followed by your entry (e.g. 975);
the current setting will be flashing in the entry field (e.g. 0).
¤ Press the key Q or  to determine the setting for new
messages:
¤ Confirm by pressing OK or go back to the idle display without saving by pressing Back.
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from
the charging cradle.
v
¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ Auto Answer ¤ Change (³ = activated)
Regardless of the setting Au
to Answer, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold c for a further 2 seconds while placing
the handset in the charging cradle
.
Note
The handset's standby time can be significantly reduced if the display backlight is activated.
M4 for messages on the network mailbox
M5 for missed calls
MM for messages on the answer machine
(only Gigaset C430A)
Q The Message key flashes
(stops when the key is pressed)
 The Message key does not flash
System
975 SET:
[0]
Back OK