Operation Manual

Gigaset C430-C430A / LUG - UK-IE / A31008-M2502-L101-1-7619 / settings.fm / 5/14/13

Template Borneo, Version 1, 21.06.2012

Changing the system PIN

v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q System PIN ¤ OK 

¤ If current PIN not 0000: enter current PIN ¤ OK 

¤ Enter new system PIN (4 digits; 0 - 9) ¤ Save

Resetting system PIN

If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base

settings will be reset and all the handsets will be de-registered!

¤ Remove the power cord from the base.

¤ Press and hold the Registration/Paging key (C430A ¢ page 2, C430 ¢ page 3) and at the

same time reconnect the power cord to the base. 

¤ Hold the Registration/paging key for at least 5 seconds.

Restoring phone to default setting

You can reset individual modifications to base and handset settings separately.

The following are not af

fected by the reset:

u Date

/ time,

u Registration of handsets to the base and the current selection of the base,

u System PIN,

u Entries in the calendar and phonebook,

u Redial list.

When resetting the handset (H

andset Reset), audio and display settings will be deleted.

When resetting the base (Bas

e Reset), ECO DECT, answer machine, system settings and internal

handset names, as well as call lists/answer machine lists, will be reset

Resetting the handset/base station

v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Handset Reset / Base Reset ¤ For Base Reset:

Enter the system PIN

¤ OK ¤ Confirm security prompt with Ye s

ECO DECT

ECO DECT uses less energy and reduces transmission power.

Reducing transmission power (radiation)

In normal operation (default setting):

The device range is set to maximum as default. This guarantees optimum wireless management.

In idle status, the handset will not function (as it is not transmitting). Only the base will maintain

contact with the handset via a low wireless signal. During a call, the transmission power

automatically adapts to the distance between the base and handset. A closer distance to the

base means lower transmission power.

You can reduce the transmission power even further: