Operation Manual

33
Gigaset C430-C430A / LUG - UK-IE / A31008-M2502-L101-1-7619 / settings.fm / 5/14/13
Template Borneo, Version 1, 21.06.2012
ECO DECT
1) Reducing the range and thereby lowering transmission power by up
to 80%
In many spaces such as apartments, business rooms and offices, the maximum range is not
necessary. If you deactivate the Maximum Range setting, you can reduce the transmission
power during a call by up to 80%, using half of the range.
v
¤ Ï ¤ OK ¤ q ECO DECT ¤ OK ¤ Maximum Range ¤ Change (³ = activated)
Display icon for reduced range
¢ page 51. 
This setting cannot be used with a repeater (
¢ page 31).
2) Deactivating DECT wireless module in idle status (Eco Mode+)
With the No Radiation setting, you can deactivate the transmission power of the base
completely during idle status.
v
¤ Ï ¤ OK ¤ q ECO DECT ¤ OK ¤ q No Radiation ¤ Change (³ = activated)
When the wireless model i
s deactivated, the icon ¼ is displayed in idle status instead of the
signal strength icon. 
This setting cannot be used with a repeater (
¢ page 31).
Notes
u To enjoy the benefits of the No Radiation setting, all registered handsets must support
this feature.
u When the No Radiation setting is activated and a handset is registered to the base that
does not support this feature, No Radiation will automatically be deactivated. As soon as
this handset is de-registered, No Radiation will automatically be re-activated.
u The wireless connection will only be established for an incoming or outgoing call and the
connection will be delayed by about 2 seconds.
u So that a handset can establish a wireless connection with the base more quickly for an
incoming call, it must "listen" to the base more often, i.e. scan the environment. This
increases power usage and reduces the standby and talktime duration of the handset.
u When No Radiation is activated, there will be no range display/range alarm on the
handset. Contactability can be tested by assigning a line: Press and hold the Answer call
key
c. You will hear the ringing tone.