User manual

Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Device
Gigaset GS3 / LUG AU-IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 12/10/20
58
Automatically disable Power save mode when charge level is adequate
When the function is enabled, Power save mode is disabled automatically when the battery is
90% full.
 Settings Battery Battery Saver Enable/disable the Turn off when fully
charged option with the switch
Storage
The device differentiates between permanent device storage (which can be extended with a
memory card) and main memory. The permanent storage area is for data such as music and
photos. Main memory is temporary storage used by the device to run apps and the overall
system.
Device storage management without memory card
Check the available storage capacity and memory usage of apps.
 Settings Storage . . . The total storage capacity available, and that being used
at the moment, are displayed, as well as a list of components using storage capacity
Show more information: Tap an entry
Device storage management with memory card
 Settings Storage . . .
Checking the available storage capacity and memory usage of apps:
 Tap Internal shared storage next to
View contents of memory card:
 Next to , tap the name of the memory card Select app as required . . . The contents of
the memory card are displayed.
Ejecting memory card:
 Next to the memory card, tap . . . The memory card is deactivated. It can no longer be used
as storage and the information on it is no longer available.
Using the memory card again:
 Next to , tap the name of the memory card Mount
When Power save mode is enabled, the Dark theme function is enabled and the
battery icon in the status bar has a red border.
Power Save mode ends automatically when the device is being charged.
The device detects memory cards with a storage capacity of 32 GB. Higher capacity
cards (to 512 GB) can be used if formatted on the Gigaset GS3 (not from a PC).