User manual

Gigaset GS3 / LUG AU-IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 12/10/20
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Network connections
79
Pairing
Before you can connect a phone or tablet to a Bluetooth device, you must perform a pairing
between these devices. After a pairing is performed, the devices keep this status until the pairing
is ended.
 Settings Connected devices Bluetooth Pair new device . . . Bluetooth
devices available in the vicinity are displayed Tap the name of the required Bluetooth
device Follow the subsequent instructions on the screen to complete the pairing . . . If
performed successfully, the device is included in the Previously connected list
Changing the names of connected Bluetooth devices or ending pairing
 Settings Connected devices Next to the device connected, tap
Changing the name: Enter the name of the device Rename
Ending a pairing: Forget
Enable functions for connected devices
Permit Bluetooth-enabled devices to access your contacts, your SIM card and (via your device)
the Internet.
 Settings Connected devices Click next to the device connected Use
the switch to enable/disable Internet access / Contact sharing / SIM Access
Changing the Bluetooth name of the smartphone
The smartphone can be seen by other Bluetooth devices under name Gigaset GS3. You can
change this name.
 Settings Connected devices Bluetooth Device name Enter the
new device name Rename
The device can be seen by all nearby devices with Bluetooth function.
To prolong the battery life, disable the Bluetooth function when you are not using it.
Bluetooth is disabled in Flight mode.
If you are prompted to do so, enter the ID displayed. If no ID is displayed, try popular
IDs such as 0000 and 1234, or read the documentation for the Bluetooth device.