User manual
Table Of Contents
- Contents
- Overview
- Safety precautions
- Getting started
- Using the device
- Getting to know your device
- Configuring the start screens
- Notifications
- Apps
- Downloads
- Fingerprint sensor
- Protection from unwanted interruptions
- Additional functions
- Communication
- Settings
- Device
- Security
- Accounts and location detection
- Apps
- Network connections
- System
- Appendix
- Index
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Network connections
Gigaset GS3 / LUG AU-IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 12/10/20
82
Changing WLAN hotspot settings
Change the network name, security, password and frequency band for access points.
Settings Network & internet Hotspot & tethering WLAN hotspot
Select the required option and change it as required
Connecting a device to the WLAN hotspot
To connect, you need the name and password of the hotspot. The name is displayed under
Hotspot name. Show password:
Settings Network & internet Hotspot & tethering WLAN hotspot Tap
Hotspot password . . . The password is shown
Connecting to the hotspot on the other device:
Open the list of WLANs within range Select network with the network name of the
hotspot Enter the password for the hotspot Connect.
Setting up and using Bluetooth tethering
Share the Internet connection with other devices via Bluetooth.
Carry out pairing between the smartphone and the device with which you want to share the
Internet connection ( p. 79)
Set up the other device so that it establishes a network connection over Bluetooth. For more
information, read the instructions for the device.
Enabling and disabling the Internet connection of the phone via Blue
tooth tethering:
Settings Network & internet Hotspot & tethering Enable/disable the
Bluetooth tethering function with the switch . . . You can now establish an Internet
connection with the other device
Setting up and using USB tethering
Share the Internet connection with another device over a USB cable.
Use a USB cable to connect a smartphone to another device Open the notification over the
USB connection Select USB tethering
Enabling/disabling USB tethering:
Settings Network & internet Hotspot & tethering Enable/disable the USB
tethering function with the switch . . . You can now establish an Internet connection with the
other device
The mobile data connection is active p. 72
The mobile data connection is active p. 72