User manual
Table Of Contents
- Contents
- Overview
- Safety precautions
- Getting started
- Using the device
- Getting to know your device
- Configuring the start screens
- Notifications
- Apps
- Downloads
- Fingerprint sensor
- Protection from unwanted interruptions
- Additional functions
- Communication
- Settings
- Device
- Security
- Accounts and location detection
- Apps
- Network connections
- System
- Appendix
- Index
Gigaset GS3 / LUG AU-IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings.fm / 12/10/20
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
System
83
When USB tethering is enabled, the icon is displayed in the Notifications bar.
System
Date and time
Settings System Date & time . . .
Automatic setting
The date and time are set automatically using a time server:
Tap Use network-provided time Select the required option (network or GPS)
or: Disable it and set the date and time manually
Manual setting
Date Select a date in the calendar OK
Time Drag the hour display to the correct position OK
Use the outer ring for 12-hour display
Use the inner and outer rings for 24-hour display
Tap the minutes display of the time displayed Drag the pointer to the correct position
OK
Setting the time zone
The time zone is set automatically by default. Selecting the time zone yourself:
Disable the switch next to Use network-provided time zone Tap Select time zone
Select the time zone from the list
Setting the date and time format
Use Date and time format appropriate for the country set ( p. 54).
Enable the switch next to Use locale default
or
Displaying the time in 24-hour format (e.g.
18:30) / 12-hour format (6:30 pm):
Enable/disable the switch next to Use 24-hour format
USB tethering is disabled permanently if you unplug the USB cable.
USB tethering is not available on Mac computers.