Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Cover_front.fm / 26.04.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / introduction.fm / 26.04.2012 Gigaset N510 IP PRO ... Gigaset N510 IP PRO ... ... with impressive internal qualities. With a Gigaset handset, you will be amazed by the perfect sound quality. Your Gigaset can do a lot more than just make calls: Connect your Gigaset to the Internet and your PC via Ethernet. Telephone over the Internet. Manage your Gigaset from your PC using a Web browser.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / introduction.fm / 26.04.2012 Functions of the button on the base Functions of the button on the base Registration/paging button Functions of the registration/paging button on the base Lights up: Flashes: Press briefly: Press and hold: LAN connection active (phone is connected to router) Data transfer to LAN connection Launch paging (handset search), display IP address of the base on the handset Set base to registration mode Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROIVZ.fm / 26.04.2012 Contents Contents Gigaset N510 IP PRO ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functions of the button on the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROIVZ.fm / 26.04.2012 Contents Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Activating/deactivating network mailboxes, entering numbers . . . . . . . . . . . . . . . . 64 Configuring a network mailbox for fast access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROIVZ.fm / 26.04.2012 Contents Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Caring for your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Contact with liquid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Authorisation . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / security.fm / 24.04.2012 Safety precautions Safety precautions Warning Read the safety precautions and the user manual before use. Explain their content and the potential hazards associated with using the telephone to your children. Use only the power adapter supplied, as indicated on the underside of the base. Use only the cable supplied for the LAN connection and connect it to the intended port only.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps First steps Checking the package contents 1 2 3 4 §§1§§ One base, Gigaset N510 IP PRO §§2§§ One power adapter for connecting the base to the mains power supply §§3§§ One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting the base to a router/switch (LAN/Internet) §§4§§ One CD Please note The device colour may differ from the one shown here. Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Setting up the base The base station is designed for use in dry rooms in a temperature range of +5°C to +45°C. ¤ Set up the base station at a central point in the building. Please note Pay attention to the range of the base. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings. The range is reduced when Eco Mode is activated (£ page 67).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Connecting the base The following diagram is an overview of all connections for your base. The individual connections are described in detail below. In order to make calls over VoIP, you must connect the base to the Internet (see diagram below) and register at least one handset to the base (£ page 15). 4 3 1 2 Follow the steps in the order given below: §§1§§ Connect the power cable to the base.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps 1. Connecting the power cable to the base 1 Back panel of the base 2 §§1§§ Insert the power cable of the power adapter into the connection socket at the rear of the base. §§2§§ Insert the cable into the cable recess provided. Warning Use only the power cable supplied. 2. Connecting the base to the mains power supply Back panel 1 of the base Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps 3. Connecting the base to a router (Internet) Data protection notice When the device is connected to the router, it automatically contacts the Gigaset support server to make it easier for you to configure the devices and to enable communication with the Internet services. For this purpose, every device sends the following device-specific information once every day.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps 2 Back panel of the base 1 §§1§§ Insert a plug from the Ethernet cable supplied (Cat 5 with 2 RJ45 modular jacks) into the LAN connection socket at the side of the base. §§2§§ Insert the second Ethernet cable plug into a LAN socket on the router. Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps 4. Connecting the PC to the router (optional) You can change the settings on the phone's base using a PC connected to your phone via the router. PC system requirements: u Ethernet port u Web browser such as Microsoft Internet Explorer version 7.0 or higher, or Mozilla Fire- fox version 3.5 or higher u DHCP must be activated (e.g.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Registering the handset You must register the handset (a) to the base (b). a) On the handset ¤ Start the registration procedure on the handset in accordance with the handset's user manual. A message usually appears on the display stating that the handset is searching for a base that is ready for registration.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Setting up the phone – installation wizard Please note If you have connected your Gigaset N510 IP PRO to a Gigaset PRO PABX (e.g., Gigaset T500 PRO or Gigaset T300 PRO), use the PABX VoIP configuration. Your Gigaset N510 IP PRO searches the network for a provisioning file and checks whether VoIP accounts already exist. If the phone has existing VoIP accounts, these accounts are configured automatically.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Auto configuration: The configuration process for VoIP connections is automated for some VoIP providers. The provider creates a configuration file with all required VoIP access data (the general VoIP provider data and your personal account data). This file is placed on a configuration server on the Internet for downloading to your phone. Your provider gives you a configuration code.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps 1. IP wizard – making VoIP settings You will see the following display: IP Wizard ? Start IP installation wizard? No Yes Before you can use VoIP to phone any other numbers over the Internet, the fixed line or the mobile network, you need the services of a VoIP provider which supports the VoIP SIP standard. Prerequisite: You have registered with a VoIP provider (e.g.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Launching the IP wizard Prerequisite: The phone is connected to the router. The router is connected to the Internet (£ page 12). ¤ Press on the centre of the control key w or on the right display key §Yes§ to launch the IP wizard. IP Wizard Ð This wizard helps Information about the IP wizard appears in the display. ¤ Press the bottom of the control key s to scroll down.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps You will see the following display: IP Wizard ? Do you have a code for auto configuration? No Your VoIP provider has supplied you with an authentication name/password and, where applicable, a user name: ¤ Press the key below §No§ on the dis- Version 5, 23.09.2008 ¤ 20 play screen. For further information, please see „Downloading VoIP provider data“ £ page 22.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps No Internet connection: The phone requires an Internet connection for you to register your telephone with a VoIP provider. If a connection cannot be made, one of the following messages is displayed: u If the phone cannot establish a connection to the router, the message IP address not available is displayed. Check the plug connection between the router and the base and check the settings on the router.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps ¤ For further information, please see „2. Connection wizard“, page 25. Downloading VoIP provider data The connection wizard establishes a connection with the Gigaset configuration server on the Internet. Various profiles with general access data for different VoIP providers can be downloaded here. After a brief period you will see the following display: A list of countries is loaded.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps You have not been able to download your provider's data If your VoIP provider does not appear in the list, i.e. its general data is not provided for download, you must cancel the IP wizard: ¤ Briefly press the end call key a repeatedly until End wizard? appears in the display and then press the display key §Yes§. You can perform the subsequent steps of the installation wizard.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps ¤ Use the keypad to enter your password. IP Wizard Password: Abc
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps 2. Connection wizard Using the connection wizard, you can assign the previously configured connections (£ page 18) to the internal parties as receive or, if applicable, as send connections. Internal parties are the registered handsets. u Receive connections are the phone numbers (connections) on which you can be called.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Launching the connection wizard a. Connection Wizard ? ¤ Press the display key §Yes§ if you wish to ¤ Assign connections to handset change the setting for the send and receive connections of the handset with the internal name INT1. Press the display key §No§ if you do not wish to change the setting for this handset. INT1? No Yes b. Rec.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps c. If no calls to the VoIP connection IP1 are to be signalled on the handset: ¤ Press right on the control key v to set to No. INT 1 Receive calls for IP1: < Yes Back > Save The updated list of receive connections is displayed one more time for you to check. Press the display key §OK§ to confirm the assignment. d. Send Connections Ð The send connection currently set for the handset is displayed: IP1.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps e. If the handset is to make calls via a different connection/phone number: ¤ Press right on the control key v repeatedly, until the required connection is displayed (in the example, IP3). INT 1 Connection for outgoing calls: > < IP3 Back Save ¤ Press the display key §Save§ to save the settings. Instead of a connection, you can also select Sel. at each call.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Completing the installation The handset then returns to the Telephony menu.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Proceeding Now you have successfully set up your phone, you’ll want to adapt it to your personal requirements. Use the following guide to quickly locate the most important subjects. Information on ... ... is located here.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps Understanding the operating steps in the user manual The operating steps have been shortened and are based on a Gigaset SL610H PRO handset. Example: The display: v ¢ Ï ¢ Eco Mode ¢ Eco Mode+ (³ = on) means: ¤ Press right on the control key v to open the main menu. ¤ Press right, left, down and up on the con- Settings Ç È É trol key p to navigate to the Settings submenu.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012 First steps ¤ Press down on the control key s until the Eco Mode Eco Mode Eco Mode+ Back Eco Mode+ menu option is highlighted. ³ ´ Change ¤ Press the display key §Change§ to activate/ deactivate the function. The change is effective immediately and does not need to be confirmed. Eco Mode Eco Mode Eco Mode+ Back ³ ³ Change ¤ Press the key below §Back§ to skip back to Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / menutree.fm / 26.04.2012 Menu tree Menu tree You can use the base functions of your Gigaset N510 IP PRO via a registered handset. On the Gigaset SL610 PRO, C610H, SL78H, SL400H, S79H or S810H handsets, the base functions are contained in the handset menu. Handset-specific functions are not shown below. In place of the handset-specific functions, "..." appears in the submenus. Function names may vary between the individual handsets.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / menutree.fm / 26.04.2012 Menu tree È Ï Info Centre only on Gigaset Gigaset SL610 PRO, SL78H, SL400H, S79H oder S810H handset; on Gigaset C610H handsets you will find the Info Center in the Additional Features menu. Settings £ page 75 Date/Time Audio Settings ... £ page 78 Music on hold Registration ... £ page 70 De-reg. Handset • Telephony ... £ page 77 Area Codes VoIP Wizard Send Connections INT 1 ... INT 6 Rec. Connections INT 1 .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012 Making calls Making calls You can make calls on a Gigaset handset connected to your base. Please note You can make up to four external calls at the same time via your base, depending on the quality of your DSL connection. Making an external call To make an external call, you need to define one of the phone connections as a send connection.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012 Making calls Selecting a line for each call Prerequisite: "Sel. at each call" has been assigned to the handset instead of a send connection (£ page 81). ~ c Enter the number and press the talk key. The list of all the phone's connections is displayed. q Select a line. §Dial§/w Press the display key or the middle of the control key.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012 Making calls Displaying the phone number you are calling (COLP) Prerequisites: u Your network provider supports COLP (Connected Line Identification Presentation). You may need to activate COLP with the provider (ask your provider about this). u The called party has not activated COLR (Connected Line Identification Restriction).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012 Making calls Calling Line Identification When you receive a call, the caller's number and/or name is displayed on the screen if the following prerequisites are met: u Your network provider supports CLIP, CLI and CNIP. – CLI (Calling Line Identification): The caller's number is transmitted. – CLIP (Calling Line Identification Presentation): The caller's number is displayed.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012 Making calls Display with CNIP If you have CNIP, then the name (location) that is registered with your network provider for the caller's number is displayed. If the number of the caller is stored in your directory, the CNIP display is replaced by the corresponding directory entry.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012 Making calls Have you requested the phone number display service from your network provider? ¤ Check whether your provider supports phone number display (CLIP) and that the function has been activated for you. If necessary, contact your provider. Additional information on this subject can be found on the Gigaset website at: www.gigaset.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012 Making calls using select services Making calls using select services Select services are functions that your network provider makes available to you. Please note: u Some settings cannot be made simultaneously on multiple handsets. If this is the case, you will hear a negative acknowledge tone. u Some select services may only be used if you have requested them from your network provider (there may be an extra charge).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012 Making calls using select services General call divert (CD) A distinction is made between u Diverting calls internally and u Diverting calls to an external phone number Diverting calls to an external connection (VoIP) With call divert the call is diverted to another external connection. Your call divert settings can be specific to a particular connection, i.e.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012 Making calls using select services Ring Delay If you prefer to have a delay before the call is diverted, select the length of the delay at this point (None, 10 sec., 20 sec. or 30 sec.). If you select None, the call is not signalled on the handset and is diverted immediately. §Save§ Press the display key. Internal call divert is only single-stage i.e., if calls for the handset are diverted to a different handset (e.g.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012 Making calls using select services Configuring settings during an external call Please note The services described below are only available if parallel IP connections are permitted. Accepting a waiting call You are making an external call and hear the call waiting tone. §Accept§ Press the display key.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012 Making calls using select services Consultation calls (external) You can call a second external caller. The first call is placed on hold. During an external call: §Ext. Call§ Press the display key. The previous call is placed on hold. The caller hears an announcement or music on hold. ~ Enter the second participant's telephone number. The phone number is dialled. You are connected to the second participant.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012 Making calls using select services Conference You can speak to two participants simultaneously. Prerequisite: You are conducting an external call and have called a second participant (consultation call) or have accepted a waiting call. ¤ Press the display key §Conf.§. You and the other two callers (both marked by the æ icon) can hear and speak to each other simultaneously.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / directories.fm / 26.04.2012 Using directories Using directories The options are: u (Local) directory for your handset (see handset user manual) u Public online directory and Yellow Pages u Private net directory (£ page 51) Using online directories You can use public online directories (online directories and classified directories e.g., "Yellow Pages") depending on your provider.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / directories.fm / 26.04.2012 Using directories Searching for an entry Prerequisite: You have opened the online directory/Yellow Pages. ¤ You can enter data in the following fields: Surname: (online directory) or Category/Name: (Yellow Pages) Enter the name, part of a name or the category (max. 30 characters). City: Enter the name of the town/city in which the party you are searching for lives (max. 30 characters).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / directories.fm / 26.04.2012 Using directories Search result (hit list) The search result is shown as a list on the display. Example: Online Directory 1/50 Sand, Marie Elisabe ... 1 2 +49123456789 Parkstraße 11 Berlin 12345 View Options 1. 1/50: Consecutive number/total number of hits (only the consecutive number is displayed if the total number of hits >99). 2.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / directories.fm / 26.04.2012 Using directories Starting a refined search Version 5, 23.09.2008 You can use the search options available in the refined search (first name and/or street) to limit the number of hits returned by a previous search. Prerequisite: A search result is displayed (hit list with multiple entries or a message indicating too many hits). §Refine§ Press the display key. Or §Options§ ¢ Refine Search Select and press §OK§.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / directories.fm / 26.04.2012 Using directories Using the private net directory Some providers offer users the option of creating and managing a private net directory on the Internet. The advantage of an online directory is that you can call up entries from any telephone or PC, e.g., from your VoIP phone in the office or your PC at a hotel. You can use the private net directory on your handset.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / directories.fm / 26.04.2012 Using directories Selecting, viewing and managing entries in the online directory Prerequisite: The online directory is open (see above). ¤ Scroll with s to the required entry. Or: Enter the first letter of the name and scroll with s to the required entry. ¤ Press the display key §View§. The detailed view with the complete entry opens. You can scroll through the entry with the control key q.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / charges.fm / 26.04.2012 Making cost-effective calls Making cost-effective calls Using the Internet (VoIP) is the preferred cost-effective way of making calls. Defining dialling plans You can use your phone's cost control function for calls to fixed line or mobile phone networks. Open accounts with various VoIP providers who offer favourable rates for calls to other networks. In the phone configuration, define the best connections (account), e.g.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / email.fm / 26.04.2012 E-mail notifications E-mail notifications Your phone will notify you when new e-mail messages have been received on your POP3 server. You can set your phone to periodically connect to your POP3 server and check whether you have new messages. Your handset display will show when a new e-mail message has been received.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / email.fm / 26.04.2012 E-mail notifications Opening the incoming e-mail list Prerequisites: u You have set up an e-mail account with an ISP. u The incoming e-mail server uses the POP3 protocol. u The name of the POP3 server and your personal access data (account name, password) are stored in the phone.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / email.fm / 26.04.2012 E-mail notifications Please note Many e-mail providers activate spam protection measures by default. E-mail messages classified as spam are stored in a separate folder and are therefore not shown in the incoming mail list. Some e-mail providers allow you to deactivate spam protection or show spam e-mails in the incoming mail list. Other e-mail providers may send a message to the inbox when a new spam e-mail is received.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / email.fm / 26.04.2012 E-mail notifications Viewing the message header and text of an e-mail Prerequisite: You have opened the incoming mail list (£ page 55). q Select an e-mail entry. §Read§ Press the display key. The subject of the e-mail (maximum 120 characters) and the first few characters of the text are displayed.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / email.fm / 26.04.2012 E-mail notifications Viewing e-mail sender's address Prerequisite: You have opened the e-mail notification to read it (£ page 57). §Options§ ¢ From Select and press §OK§. The sender's e-mail address is displayed, over several lines if necessary (maximum 60 lines). §Back§ Press the display key to return to the message. Example display on the Gigaset SL610 PRO handset: E-mail From: Anna.Sand@mailp.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Info_Center.fm / 26.04.2012 Info Center – continuous Internet access from your phone Info Center – continuous Internet access from your phone You can use your phone to retrieve online content from the Internet, i.e., request info services that are provided specifically for the telephone. The info services available are constantly updated.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Info_Center.fm / 26.04.2012 Info Center – continuous Internet access from your phone Coding error on requested page The content of the requested info service is coded in a format that the handset cannot display. Can’t display requested page General error when loading the info service. Login failed. Login has failed. Possible causes of this are: u You have not entered your authentication data correctly.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Info_Center.fm / 26.04.2012 Info Center – continuous Internet access from your phone Operating the Info Center Depending on the type of info service requested, you can perform the following operations: Scrolling within an info service ¤ You can use s to scroll downwards within an info service, and t to scroll up (back). Skipping back to the previous page ¤ Press the left display key.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Info_Center.fm / 26.04.2012 Info Center – continuous Internet access from your phone Entering text ¤ If necessary, use q to navigate to the line containing the field into which you want to ¤ ¤ ¤ enter text. The cursor flashes in the text field. Enter the text using the keys on your handset. If necessary, navigate to other text fields to complete them or make a selection (see below).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Info_Center.fm / 26.04.2012 Info Center – continuous Internet access from your phone Displaying information from the Internet as a screensaver You can configure your handset to display one of the info services from the Info Center (e.g., weather reports, news feeds) in the device's idle display. To do so on a Gigaset SL610 PRO, C610H, SL78H, SL400H, S79H or S810H handset, for example, you must activate the Info Services screensaver.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Net-AB.fm / 26.04.2012 Using the network mailbox Using the network mailbox Some providers offer answering machines on the network – network mailboxes. Each network mailbox accepts incoming calls made via the corresponding line (VoIP phone number). To record all calls, you should therefore set up a network mailbox for each of your VoIP phone numbers. You can activate/deactivate the network mailboxes using the handset or the Web configurator.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Net-AB.fm / 26.04.2012 Using the network mailbox The list of VoIP connections that are assigned to the handset as receive connections is displayed. Net AM: xxx is displayed, where xxx is replaced by the respective default connection name (Net AM: IP1 to Net AM: IP6). s Select entry and press §Select§ (Ø = on). If a number is already stored for this network mailbox, fast access is activated immediately. a Press and hold the end call key (idle status).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Net-AB.fm / 26.04.2012 Using the network mailbox Calling the network mailbox using the message key Under the message key f you will find a list for each network mailbox that fulfils the following prerequisites: u The corresponding connections are assigned to the handset as receive connections. u The network mailbox phone number is saved on the phone. You can use the list to call the network mailboxes directly and listen to the messages.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / add_features.fm / 26.04.2012 ECO DECT ECO DECT You are helping to protect the environment with your Gigaset. Reducing energy consumption Your telephone has a power-saving adapter plug and uses less power. Reducing radiation The radiation from your telephone is reduced automatically: the closer the handset is to the base, the lower the radiation.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / add_features.fm / 26.04.2012 ECO DECT Please note u When using Eco Mode+, you can ensure that the range of the base is sufficient by u u Version 5, 23.09.2008 u u 68 pressing and holding the talk key c. You hear the dial tone if the base can be reached. When Eco Mode+ is enabled: – Call setup is delayed by approx. 2 seconds. – Handset standby time is reduced by approx. 50%.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012 Connecting/using handsets Connecting/using handsets You can register up to six handsets and six Gigaset repeaters to your base. Each registered device is assigned an internal number (1–6) and an internal name (INT 1–INT 6). You can change the number assignment and names. If you register a seventh handset the last registered handset will be de-registered automatically.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012 Connecting/using handsets Please note All base connections are assigned to a handset as receive connections as soon as registration is complete. The first configured VoIP connection is assigned to the handset as a send connection. You can change the assignment £ page 81. Assigning the internal number The base assigns the handset the lowest free internal number (possible numbers: 1–6).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012 Connecting/using handsets Ending paging ¤ Briefly press the registration/paging button on the base (£ page 3). Or: ¤ Press the talk key c on the handset. Or: ¤ Press the display key §Silence§ on the handset. Or: ¤ Do not press any key on the base or handset: After approx. 30 seconds, the paging call will end automatically. Please note u An incoming external call will not interrupt the paging process.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012 Connecting/using handsets Ending a call a Press the end call key. Transferring a call to another handset You can transfer (connect) an external call to another handset. You are conducting an external call: u Open the list of handsets. The external party hears music on hold, if activated (£ page 78). s Select a handset or Call All and press §OK§.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012 Connecting/using handsets External call waiting during an internal call If you receive an external call during an internal call, you will hear the call waiting tone (short tone). The caller's number appears in the display if Calling Line Identification is enabled. You have the following options: Rejecting the external call §Reject§ Press the display key. The call waiting tone is turned off.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012 Connecting/using handsets Changing the internal number of an internal party A handset is automatically assigned the lowest free internal number from 1–6 during registration. If all numbers are in use, then the number 6 is overwritten as long as this handset is in idle status. You can change the internal numbers of all registered handsets (1–6). u Open the list of handsets. Your own handset is indicated by f.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Configuring the system settings Your Gigaset comes preconfigured. You can change the settings via the menu on a connected Gigaset handset, e.g., from a Gigaset SL610 PRO, C610H, SL78H, SL400H, S79H or S810H. The following instructions are based on a Gigaset SL610 PRO handset. Some settings can also be carried out via the phone's Web configurator (£ page 87).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings The following base functions can also be selected in addition to the functions provided by the handset for assigning display keys: E-mail Opens the e-mail submenu for receiving and reading e-mail notifications (£ page 55): v ¢ Ë Messaging ¢ E-mail More Functions...
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Protecting the telephone from unauthorised access Protect the phone system settings with a system PIN known only to you. You have to enter the system PIN if you register or de-register a handset, change local network settings, perform a firmware update or reset the phone to default settings.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings • Activating/deactivating music on hold v ¢ Ï Settings ¢ Audio Settings ¢ Music on hold Press §Change§ to activate or deactivate the music on hold (³ = on). Setting the base's IP address in the LAN Prerequisite: Your base is connected to a router or a PC (£ page 10). An IP address is required in order for the LAN to "recognise" your phone.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings DNS Server Enter the IP address for the preferred DNS server. The DNS server (Domain Name System, £ page 124) converts the symbolic name of a server (DNS name) into the public IP address for the server when the connection is made. You can specify your router's IP address here. The router forwards phone address requests to its DNS server. The default is 192.168.1.1.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Configuring VoIP connections You can configure up to six VoIP connections on your telephone, i.e., you can assign up to six VoIP phone numbers to your phone. You need to set up an IP account (VoIP account) with a VoIP provider for each connection. You must save the access data for this IP account on your phone. The IP wizard will help you to do this.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings The new data for your VoIP provider will be downloaded and saved on the phone. If you answer the prompt with §No§, the phone returns to idle status. Your telephone will not remind you of this new profile again. The message will only be shown again if a newer version of the provider data is available.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Assigning receive connection(s) Prerequisite: Several connections are configured for your phone. v ¢ Ï Settings ¢ Telephony ¢ Rec. Connections A list of internal parties (handsets) is displayed. q Select the internal parties that should be assigned new receive connections and press the display key §OK§. A list containing all configured connections is opened.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Please note u The firmware update can take up to six minutes, depending on the quality of your DSL connection. u When updating from the Internet, checks are made to ensure that no newer ver- sion of the firmware exists. If this is not the case, the operation is terminated and a message is issued to that effect.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Resetting the base to the default settings The individual settings are reset. Resetting the base via the menu When the settings are restored: u Handsets are still registered u The system PIN is not reset.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012 Configuring the system settings Resetting the base using the button on the base As with resetting the base via the menu, all individual settings are reset. The system PIN is also reset to 0000 and all handsets registered above and beyond the scope of delivery will be de-registered. Please note For instructions on re-registering the handsets after a reset (where applicable) £ page 69.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / PABX.fm / 24.04.2012 Connecting the phone to a PABX Connecting the phone to a PABX The following settings are only necessary if your PABX requires them; see the PABX user manual. Saving an access code (outside line code) Version 5, 23.09.2008 You may have to enter an access code in front of the phone number for external calls (outside line code, e.g., "0").
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Configuring the phone via the Web configurator The Web configurator for your Gigaset telephone enables you to change the settings for your phone conveniently on your PC. u Alternatively, you can change the settings that are also available on a registered Gigaset telephone handset via the Web browser on your PC, e.g.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Establishing a connection via the phone's IP address ¤ Determining a telephone's current IP address via one of the registered handsets: You can see the phone's current IP address in the handset display by briefly pressing the registration/paging button on the base. Your phone's IP address can change if you have activated dynamic IP address assignment (£ page 78).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Logging into/off the Web configurator Prerequisite: Your PC and phone are connected to the Internet. Logging in, setting the interface language Once you have successfully established the connection, the Login Web page is displayed in the Web browser. You can select the language you want the menus and Web configurator dialogs to be displayed in.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Please note u If the system PIN is still set as 0000 on the phone (default setting), you will be noti- fied during login that the device is not secure and you should change the PIN. You can deactivate this security advice for subsequent logins by selecting the option "Don’t show this security advice again.". Click OK to close the dialog box.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Menu bar The Web configurator menus are displayed in the form of tab pages in the menu bar. The following menus are available: Home The home page opens once you have logged in to the Web configurator. It contains information on the Web configurator functions. If no VoIP account exists yet, the home page provides access to the Quick Start Wizard, £ page 96.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Working area Depending on the function selected in the navigation area, information or dialog boxes are displayed in the working area that allow you to make or change your phone settings. Making changes Make settings via input fields, lists or options. u There may be restrictions regarding the possible values for a field e.g.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Buttons Buttons are displayed in the bottom section of the working area. Depending on the current function of a Web page, various buttons are displayed. The functions of these buttons are described in the online Help of the Web configurator.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Opening Web pages A brief outline of how to navigate to the individual Web configurator functions is given below. Example Defining dialling plans: Settings ¢ Telephony ¢ Dialling Plans To open the Web page, proceed as follows after login: ¤ Select the Settings menu in the menu bar. ¤ Click the Telephony function in the navigation area.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Functions of the Web configurator Quick Start Wizard The Quick Start Wizard helps you configure your VoIP connection. It is provided on the home page if no VoIP account has been configured yet.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Connecting the base to the local network (LAN/router) You can find the functions for connecting to the LAN on the Web page: Settings ¢ Network ¢ IP Configuration In most cases, special settings are not required to connect the phone to the router/a local network. Your phone is preconfigured for dynamic assignment of the IP address by default (DHCP).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Making security settings – managing certificates for TLS authentication The phone supports the establishment of secure data connections on the Internet with the TLS security protocol (Transport Layer Security). With TLS, the client (the phone) uses certificates to identify the server. These certificates must be stored on the base.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Managing base connections – activating/deactivating connections You can manage your base connections using the Web page: Settings ¢ Telephony ¢ Connections This Web page displays a list with all possible connections and your status (e.g., connected, registered): IP Connections You can assign up to six VoIP connections (VoIP phone numbers) to your phone.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Optimising voice quality for VoIP connections Functions to improve the voice quality on VoIP connections are available on the Web page: Settings ¢ Telephony ¢ Audio The voice quality for VoIP connections is mainly determined by the voice codec used for transferring the data and the available bandwidth of your DSL connection.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Please note Observe the following for good voice quality: u When making calls using VoIP, avoid performing other Internet activities (e.g., surfing the Internet). u Please note that voice delays can occur depending on the codec used and the network capacity utilisation.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Access codes – activating dialling plans when connecting to a PABX If your phone is connected to a PABX, you may have to enter an access code for external calls (outside line code, e.g., "0"). Save an access code and specify when the phone numbers should be automatically prefixed with the digits.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Please note u The settings for DTMF signalling apply to all VoIP connections (VoIP accounts). u DTMF signals cannot be transmitted in the audio path (Audio) on broadband con- nections (the G.722 codec is used).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Defining local communication ports (listen ports) for VoIP The settings for the communication ports are on the Web page: Settings ¢ Telephony ¢ Advanced VoIP Settings The following communication ports are used for VoIP telephony: u SIP port The communication port via which the phone receives (SIP) signalling data.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Making settings for access to Internet services Version 5, 23.09.2008 You can use the following Internet services on your phone. u E-mail notifications You can set up up to six e-mail accounts. In order to use the e-mail function of your base, you have to save the addresses of the POP3 servers and your personal access data for your mailboxes in the base.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Deleting handset directories and downloading to/from the PC You will find the functions for editing the telephone/address books (both referred to as "directories" hereafter) on the Web page: Settings ¢ Directories ¢ Directory Transfer The Web configurator has the following options for editing the directories of the registered handsets. u Store the directories on a PC.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Directory file content (vcf file) The following data (if available) is written into the vcf file for entry into the directory or transferred from a vcf file into the handset directory: u Surname u First name u Number u Number (office) u Number (mobile) u E-mail address u Birthday (YYYY-MM-DD) and time of the reminder call (HH:MM) separated by a "T" (example: 2008-12-24T11:00).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Restarting the device or restoring the factory settings If your telephone no longer works as expected you can restart it. In most cases this will solve the problem. You can also reset the phone to its factory settings, e.g., if you give your device to a third party.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012 Configuring the phone via the Web configurator Updating firmware for the base/downgrading firmware updates You can start firmware updates and downgrades via the Web page: Settings ¢ Management ¢ Firmware Update Regular updates to the base firmware and the provider profile for your VoIP connections (general provider data) are made available on an Internet configuration server.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance Customer Service & Assistance Questions? For rapid assistance, refer to this user guide or visit www.gigaset.com/pro. The trade outlet where you bought your PABX will be happy to help with further questions relating to your Gigaset Professional PABX. Questions and answers If you have any queries about the use of your telephone, visit our website at www.gigaset.com/pro/wiki.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance You hear an error tone (descending tone sequence) when keying an input. ¥ Action has failed/invalid input. Repeat the process. Watch the display and refer to the user manual if necessary. No time is specified for a message in the call list. ¥ ¥ Date and time have not been set. Set date/time or Activate synchronisation with a time server on the Internet via the Web configurator.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance Information on operating Gigaset VoIP telephones with routers with Network Address Translation (NAT) In general no special telephone or router configuration is required when operating a Gigaset VoIP phone with NAT router. The configuration settings described in this section are only necessary if you encounter one of the following problems.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance 2. Setting port forwarding on the router To ensure that your specified SIP and RTP port numbers are used on the WAN interface with the public IP address, you must define port forwarding rules for the SIP and RTP ports on the router. To define port forwarding on the router, proceed as follows: The terms used below may vary from router to router.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance VoIP status codes In the following tables you will find the meaning of the most important VoIP status codes and messages. Version 5, 23.09.2008 Status code Meaning 0x31 IP configuration error: IP domain not entered. 0x33 IP configuration error: SIP username (Authentication ) not entered.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance Version 5, 23.09.2008 Status code Meaning 116 0x415 Query format is not supported. 0x416 URI is faulty. 0x420 Incorrect ending 0x421 Incorrect ending 0x423 The requested service is not supported by the VoIP provider. 0x480 The dialled number is temporarily unavailable. 0x481 The recipient is not available.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance Version 5, 23.09.2008 Status code Meaning 0x504 Time limit exceeded at the gateway 0x505 The server rejects the query because the indicated version number of the SIP protocol does not concur with at least the version that is used by the server or SIP device involved in this query. 0x515 The server rejects the query because the message exceeds the maximum permitted size.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Customer Service & Assistance Checking service information If you contact Customer Care, you may need the base's service information. Prerequisite: You have assigned an outside line (try to establish an external call, make an external call). Please note You may need to wait a few seconds before §Options§ appears on the display §Options§ ¢ Service Info Confirm selection with §OK§.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Environment Environment Our environmental mission statement We, Gigaset Communications GmbH, bear social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society and the environment. The aim of our global activity is to secure sustainable life resources for humanity. We are committed to a responsibility for our products that comprises their entire life cycle.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Appendix Appendix Caring for your telephone Wipe the unit with a damp cloth or an antistatic cloth. Do not use solvents or microfibre cloths. You can treat high-gloss surfaces carefully using display polish. Never use a dry cloth. This can cause static. Contact with liquid ! If the device comes into contact with liquid: §§1§§ Unplug the power supply. §§2§§ Allow the liquid to drain from the device.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012 Appendix Specifications Base power consumption In standby mode: approx. 1.2 W During a call: approx 1.3 W Version 5, 23.09.2008 General specifications Interfaces Ethernet DECT standard Supported GAP standard Supported No.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary Glossary A ADSL Asymmetric Digital Subscriber Line Special form of DSL. ALG Application Layer Gateway NAT control mechanism of a router. Many routers with integrated NAT use ALG. ALG lets the data packets in a VoIP connection pass and adds the public IP address of the secure private network. The router's ALG should be deactivated if the VoIP provider offers a STUN server or an outbound proxy.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary Client Application that requests a service from a server. Codec Coder/decoder Codec is a procedure that digitises and compresses analogue voice before it is sent via the Internet, and decodes – i.e., translates into analogue voice – digital data when voice packets are received. There are different codecs with differing degrees of compression, for instance.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary Display name VoIP provider feature. You can specify any name that is to be shown to the other party during a call instead of your phone number. DMZ (Demilitarised Zone) DMZ describes a part of a network that is outside the firewall. A DMZ is set up, as it were, between a network you want to protect (e.g., a LAN) and a non-secure network (e.g., the Internet).
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary DynDNS Dynamic DNS Domain names and IP addresses are assigned via DNS. For Dynamic IP addresses this service is enhanced with "Dynamic DNS". This permits the use of a network component with a dynamic IP address as a Server on the Internet. DynDNS ensures that a service can always be addressed on the Internet under the same Domain name, regardless of the current IP address.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary G G.711 a law, G.711 μ law Standard for a Codec. G.711 delivers very good voice quality that corresponds to that in the ISDN network. As there is little compression, the necessary bandwidth is around 64 kbit/s per voice connection, but the delay caused by coding/decoding is only approx. 0.125 ms. "a law" describes the European standard and "μ law" describes the North American/ Japanese equivalent. G.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary HTTP proxy Server via which the Network subscribers can process their Internet traffic. Hub Uses one Infrastructure network to connect several Network subscribers. All data sent to the hub by one network subscriber is forwarded to all network subscribers. See also: Gateway, Router. I IEEE Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary L LAN Local Area Network Network with a restricted physical range. A LAN can be wireless (WLAN) and/or wired. Local IP address The local or private IP address is the address for a network component in the local network (LAN). The network operator can assign any address they want. Devices that act as a link from a local network to the Internet (gateway or router) have a public and a private IP address.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary Network Group of devices. Devices can be connected in either wired or wireless mode. Networks can also differ in range and structure: – Range: Local networks (LAN) or wide-area networks (WAN) – Structure: Infrastructure network or ad-hoc network Network subscriber Devices and PCs that are connected to each other in a network e.g., servers, PCs and phones.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary Protocol Describes the agreements for communicating within a Network. It contains rules for opening, administering and closing a connection, about data formats, time frames and possible error handling. Proxy/Proxy server Computer program that controls the exchange of data between Client and Server in computer networks.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary ROM Read Only Memory A type of memory that can only be read. Router Routes data packets within a network and between different networks via the quickest route. Can connect Ethernet networks and WLAN. Can be a Gateway to the Internet. Routing Routing is the transfer of data packets to another subscriber in your network.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary STUN Simple Transversal of UDP over NAT NAT control mechanism. STUN is a data protocol for VoIP telephones. STUN replaces the private IP address in the VoIP telephone data packets with the public address of the secure private network. To control data transfer, a STUN server is also required on the Internet. STUN cannot be implemented with symmetric NATs. See also: ALG, Firewall, NAT, Outbound proxy.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Glossary.fm / 26.04.2012 Glossary URI Uniform Resource Identifier Character string for identifying resources (e.g., e-mail recipient, http://gigaset.com, files). On the Internet, URIs are used as a uniform identification for resources. URIs are also described as SIP addresses. URIs can be entered in the phone as a number. By dialling a URI, you can call an Internet subscriber with VoIP equipment.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / accessories_SAG.fm / 24.04.2012 Accessories Accessories Gigaset handsets Upgrade your Gigaset to a cordless PABX: Gigaset SL610H PRO handset u 1.8“ TFT colour display u Ergonomic keypad with adjustable illumination and keypad protection Headset connection via Bluetooth® or 2.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / accessories_SAG.fm / 24.04.2012 Accessories Gigaset SL400 handset u u u u u u u u Genuine metal frame and keypad High-quality keypad illumination 1.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / accessories_SAG.fm / 24.04.2012 Accessories Gigaset SL78H handset u u u u u u u Illuminated graphic colour display (256k colours) Illuminated keypad Handsfree operation Polyphonic ringtone melodies Directory for approx. 500 entries Caller pictures PC interface e.g., for managing directory entries, ringtones and screensavers u Bluetooth u Room monitor www.gigaset.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / accessories_SAG.fm / 24.04.2012 Accessories Gigaset E49H handset u u u u u Resistant to shocks, dust and water splashes Hardy illuminated keypad Colour display Directory for 150 entries Talk/standby time of up to 12 h/250 h, standard batteries u Brilliant sound quality in speaker mode u Screensaver u ECO DECT u Alarm clock u Room monitor www.gigaset.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / montage.fm / 24.04.2012 Mounting the base on the wall Version 5, 23.09.
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROSIX.fm / 26.04.2012 Index Index A Access code . . . . . . . . . . . . . . . . . . . . . . . . . . 86 for a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Activating anonymous calling . . . . . . . . . . . . . . . . . . 41 call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 42 network mailbox . . . . . . . . . . . . . . . . . . . . 64 ADSL . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROSIX.fm / 26.04.2012 Version 5, 23.09.2008 Index Cost control . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Cost-effective calls, making . . . . . . . . . . . . 53 Costs, see Making cost-effective calls Customer Care . . . . . . . . . . . . . . . . . . . . . . . 111 CW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Cyrillic characters, entering . . . . . . . . . . . . 92 Dynamic DNS . . . . . . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROSIX.fm / 26.04.2012 Index Global IP address . . . . . . . . . . . . . . . . . . . . . 126 Global System for Mobile Communication . . . . . . . . . . 126 Group call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 H Handset changing internal number . . . . . . . . . . . 74 changing name . . . . . . . . . . . . . . . . . 73, 101 de-registering . . . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROSIX.fm / 26.04.2012 Index Message key . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Message list e-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 network mailboxes . . . . . . . . . . . . . . . . . . 66 Million bits per second. . . . . . . . . . . . . . . . 128 MRU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 MTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROSIX.fm / 26.04.2012 Index Ringback when the call is not answered . . . . . . . 130 when the number is busy . . . . . . . . . . . 130 ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 RTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 RTP port . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / N510IP-PROSIX.fm / 26.04.2012 Index W WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Weather forecast, in idle display mode . . 63 Web configurator connecting with PC . . . . . . . . . . . . . . . . . 87 de-registering . . . . . . . . . . . . . . . . . . . . . . 90 DTMF signalling for VoIP . . . . . . . . . . . . 103 menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Web page structure . . . . . . . . . . .
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Cover_back.fm / 26.04.2012 Gigaset Communications GmbH Frankenstraße 2a, D-46395 Bocholt © Gigaset Communications GmbH 2012 All rights reserved. Subject to availability. www.gigaset.