Operation Manual

101
Configuring the phone via the Web configurator
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012
Version 5, 23.09.2008
Assigning send and receive connections
For the number assignment, open the Web page:
Settings ¢ Telephony ¢ Number Assignment
Assign send and receive connections to the registered handsets.
Please note:
u During registration, each handset is automatically assigned the first configured VoIP
connection as a send connection and all base connections as receive connections.
u You can assign each handset either a fixed send connection or a line selection. With
line selection, you choose the connection to be used for each call.
Changing the name of the handsets
You can also use this page to change the name of the handsets.
Activating call divert
The settings for call divert are on the Web page:
Settings ¢ Telephony ¢ Call Divert
You can divert calls to your VoIP connections to any external number (VoIP, fixed line or
mobile number).
For each of your VoIP connections (VoIP accounts), you can determine if and when calls
to the corresponding VoIP number should be diverted to a different VoIP phone number.
Please note
Observe the following for good voice quality:
u When making calls using VoIP, avoid performing other Internet activities (e.g., surf-
ing the Internet).
u Please note that voice delays can occur depending on the codec used and the net-
work capacity utilisation.
Please note
u You can override the assignment of the send connection for certain phone num-
bers by defining dialling plans for these numbers.
u For number assignment £ page 81.