Operation Manual

108
Configuring the phone via the Web configurator
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012
Version 5, 23.09.2008
Directory file content (vcf file)
The following data (if available) is written into the vcf file for entry into the directory or
transferred from a vcf file into the handset directory:
u Surname
u First name
u Number
u Number (office)
u Number (mobile)
u E-mail address
u Birthday (YYYY-MM-DD) and time of the reminder call (HH:MM) separated by a "T"
(example: 2008-12-24T11:00).
Other information that a vCard may contain is not entered into the handset directory.
Example of an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
E-MAIL:[e-mail]
BDAY:2008-12-24T11:00
END:VCARD
Changing the base settings, registering handsets
You can use the Web configurator to:
u Switch the base to registration mode to register handsets to the base. This setting cor-
responds to pressing and holding the registration/paging button on the front of the
base.
u Activate or deactivate Eco Mode or Eco Mode+. For Eco Mode see page 67.
u Change the system PIN (£ page 77) for your phone.
u Activate and deactivate the LED for the registration/paging button on the front of the
base. See page 3 for the meaning of the LED.
u Activate/deactivate the display of VoIP status messages on your handset.
The base settings are on the Web page
Settings
¢ Management ¢ Miscellaneous