Operation Manual

116
Customer Service & Assistance
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012
Version 5, 23.09.2008
0x415 Query format is not supported.
0x416 URI is faulty.
0x420 Incorrect ending
0x421 Incorrect ending
0x423 The requested service is not supported by the VoIP provider.
0x480 The dialled number is temporarily unavailable.
0x481 The recipient is not available.
0x482 Double service query
0x483 Too many "jumps":
The query was rejected because the service server (proxy) has decided that this query
has already passed through too many service servers. The maximum number is
defined beforehand by the original sender of the query.
0x484 Wrong number:
In most cases this response means that you have simply omitted one or more digits in
the phone number.
0x485 The URI dialled is not unique and cannot be processed by the VoIP provider.
0x486 The called party is busy.
0x487 General faults:
The call was cancelled before a call was established. The status code confirms receipt
of the interruption signal.
0x488 The server cannot process the query because the data entered in the media descrip-
tion is not compatible.
0x491 The server reports that the query will be processed as soon as a previous query has
been completed.
0x493 The server rejects the query because the phone cannot decrypt the message. The
sender has used an encryption method that either the server or the receiver phone
cannot decrypt.
0x500 The proxy or the receiving device has discovered a fault while executing the query. It
is therefore impossible to execute the query. If this occurs, the caller or the phone dis-
plays the fault and repeats the query after a few seconds. The number of seconds after
which the query can be repeated may be transmitted to the caller or phone by the
receiving device.
0x501 The query cannot be processed by the recipient because the recipient does not have
the functionality that the caller requires. If the recipient understands the query but
does not process it because the sender does not have the necessary rights or the
query is not permitted in the current context, status code 405 is transmitted instead
of 501.
0x502 In this case, the receiving device that transmits this error code is a proxy or a gateway
and has received an invalid response from its gateway via which this query is to be
processed.
0x503 The query cannot be processed by the receiving device or the proxy at present
because the server is either overloaded or is being serviced. If it is possible for the
query to be repeated in the foreseeable future, the server informs the caller or the
phone of this.
Status code Meaning