Operation Manual

121
Appendix
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / appendix.fm / 26.04.2012
Version 5, 23.09.2008
Specifications
Base power consumption
In standby mode: approx. 1.2 W
During a call: approx 1.3 W
General specifications
Interfaces Ethernet
DECT standard Supported
GAP standard Supported
No. of channels 60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method Time multiplex, 10 ms frame length
Repeat frequency of the transmission
pulse
100 Hz
Length of the transmission pulse 370 μs
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power per channel
250 mW pulse power
Range up to 300 m outdoors, up to 50 m indoors
Power supply 230 V ~/50 Hz
Power over Ethernet PoE, IEEE 802.3af, class 3
Environmental conditions for operation +5°C to +45°C;
20% to 75% relative humidity
Codec G.711, G.726, G.729AB with VAD/CNG, G.722
Quality of Service TOS, DiffServ
Protocols SIP, RTP, DHCP, NAT Traversal (STUN), HTTP