Operation Manual

15
First steps
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012
Version 5, 23.09.2008
Registering the handset
You must register the handset (a) to the base (b).
a) On the handset
¤ Start the registration procedure on the handset in accordance with the handset's user
manual.
A message usually appears on the display stating that the handset is searching for a base
that is ready for registration.
b) On the base
¤ Within 60 seconds of starting the registration procedure, press and hold the registra-
tion/paging button on the base (approx. 3 seconds).
Once the handset has located the base, you will be asked to enter the base system PIN.
¤ Enter the four-digit system PIN for your base on the handset (default is 0000).
Once registration is complete, the handset returns to idle status. The handset's internal
number is shown in the display, e.g., INT 1. If not, repeat the procedure.
All base connections are assigned to the handset as receive connections as soon as regis-
tration is complete (incoming calls are signalled on the handset and can be answered).
The first configured VoIP connection is assigned as a send connection.