Operation Manual

16
First steps
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012
Version 5, 23.09.2008
Setting up the phone – installation wizard
In order to be able to make calls with your telephone over the Internet, you must config-
ure at least one VoIP connection on your telephone. You can configure VoIP connections
using the following methods:
u Using a Web browser on your PC to access the telephone Web configurator, ¢ Quick
Start Wizard, page 96.
u Using your telephone's installation wizard on a connected Gigaset handset.
This method is described below using the Gigaset SL610 PRO handset as an example.
Configuration is the same for Gigaset C610H, SL78H, SL400H, S79H and S810H.
Please note
If you have connected your Gigaset N510 IP PRO to a Gigaset PRO PABX (e.g.,
Gigaset T500 PRO or Gigaset T300 PRO), use the PABX VoIP configuration.
Your Gigaset N510 IP PRO searches the network for a provisioning file and checks
whether VoIP accounts already exist. If the phone has existing VoIP accounts, these
accounts are configured automatically. You can now make calls with your phone via
the Internet.
If the telephone has no existing VoIP accounts, you must configure them manually.
This process is described below.
Your phone should be automatically assigned an IP address by the router (i.e., DHCP
is enabled on router and phone).
In exceptional cases (e.g., if DHCP is not enabled on the router), you will have to
assign a fixed IP address to the base for LAN access. You must enter this IP address on
the handset before carrying out the following steps (
£ page 78).