Operation Manual

17
First steps
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012
Version 5, 23.09.2008
If VoIP connections have not yet been generated on the phone, you can start the installa-
tion wizard directly on the handset. The wizard allows you to make all necessary settings
for your phone.
Two individual wizards are combined to form the installation wizard:
§§1§§ IP wizard
§§2§§ Connection wizard
Launching the installation wizard
Auto configuration:
The configuration process for VoIP connections is automated for some VoIP providers.
The provider creates a configuration file with all required VoIP access data (the general
VoIP provider data and your personal account data). This file is placed on a configura-
tion server on the Internet for downloading to your phone.
Your provider gives you a configuration code.
The installation wizard on your phone (
£ page 17) prompts you to enter the code at
the relevant point. All the required VoIP data is then downloaded automatically onto
your phone.
The configuration file is only transferred via a secure connection (TLS authentication). If
the TLS authentication fails, the message key f flashes. Press the message key to dis-
play the Certificate error - Please check your certificates in the Web configurator.
message. Press the right display key to confirm the message.
Log in to the Web configurator (
£ page 89).
The Security (£ page 98) Web page tells you why the secure connection could not be
established and what you can do.
If the configuration file fails to download (e.g., because the configuration server is not
available), the phone keeps trying to establish a connection until the file is downloaded
successfully to the phone.
If the handset battery has sufficient charge,
the message key
f on your handset will
flash.
¤ Press the message key f .