Operation Manual

First steps

Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012

Version 5, 23.09.2008

1. IP wizard – making VoIP settings

Before you can use VoIP to phone any other numbers over the Internet, the fixed line or

the mobile network, you need the services of a VoIP provider which supports the VoIP SIP

standard.

Prerequisite: You have registered with a VoIP provider (e.g., via your PC) and set up at

least one VoIP account (IP account).

To use VoIP, you now need to enter the access data for your VoIP account. You will receive

all the necessary data from your VoIP provider. This will include:

Either:

u Your username (if requested by the VoIP provider).

This is the username of your IP account (caller ID), and is frequently identical to your

phone number.

u Your authentication name or login ID

u The (login) password registered with the VoIP provider

u General settings for your VoIP provider (server addresses etc.)

Or:

u An auto configuration code (activation code)

Your Gigaset phone's IP wizard can help you make these entries.

You will see the following display:

IP Wizard

Start IP

installation wizard?

No Yes

Please note

You can configure up to six VoIP connections. When you get started with the phone,

you can initially only configure one VoIP connection. You can configure additional

VoIP connections later with the IP wizard (

£ page 80) or the Web configurator.