Operation Manual

23
First steps
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012
Version 5, 23.09.2008
Entering user data for your VoIP account
You are now prompted to enter your personal access data for your VoIP account.
The following are provider-dependent:
u User ID, Password, User name
You have not been able to download your provider's data
If your VoIP provider does not appear in the list, i.e. its general data is not provided for
download, you must cancel the IP wizard:
¤ Briefly press the end call key a repeatedly until End wizard? appears in the dis-
play and then press the display key
§Yes§.
You can perform the subsequent steps of the installation wizard.
You must then make the required VoIP provider and IP account settings using the Web
configurator. You receive the general provider data from your VoIP provider.
You can change the assignment of the VoIP connection as send/receive connection at
a later time via the telephone menu or the Web configurator.
Please note ...
... when entering access data, it is case sensitive.
To switch between upper and lower case and digits, press the # key (several times
if necessary). You can see briefly in the display whether upper case, lower case or digit
input is selected.
Characters entered incorrectly can be deleted using the left display key below Ñ.
The character to the left of the cursor is deleted.
You can navigate within the input field using the control key
r (left/right).
¤ Using the keypad, enter the User ID that
you received from your VoIP provider.
¤ Press the key under §OK§ on the display
screen.
IP Wizard
User ID:
Abc
< C OK