Operation Manual

28
First steps
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012
Version 5, 23.09.2008
Instead of a connection, you can also select Sel. at each call. Each time you make a call,
you can then select the connection you wish to use on this handset.
If other handsets are already registered to the base, you are requested to assign send and
receive connections for the handsets. The following is shown in the display:
Assign connections to handset ?
¤ Perform steps a. to e. for each registered handset.
e.
If the handset is to make calls via a different
connection/phone number:
¤ Press right on the control key v repeat-
edly, until the required connection is dis-
played (in the example, IP3).
¤ Press the display key §Save§ to save the set-
tings.
INT 1
Connection for
outgoing calls:
< IP3 >
Back Save
After successfully configuring the settings, you
will briefly see this display.
Connection Wizard
‰
Connection -
assignment
complete