Operation Manual

First steps

Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / starting.fm / 27.04.2012

Version 5, 23.09.2008

Completing the installation

The handset then returns to the Telephony menu.

Displays

u Reception between the base and the handset:

– Good to poor:

Ð i Ñ Ò

–No reception:

(red)

Green: Eco Mode enabled

u Charge status of the batteries:

–

y y { {

(Empty to full)

–

Flashes red: batteries almost empty

–

xy x{ x{

(Charging)

u INT 1

Internal name of the handset

Date/time

There are two methods of setting the date and time:

u By default, your phone is configured so that the date and time are transferred from a

time server on the Internet, provided it is connected to the Internet.

You can activate/deactivate the synchronisation with a time server via the Web config-

urator (

£ page 106).

u You can also set the date and time manually via the menu on one of the registered

handsets (

£ page 75).

The date and time must be set in order to show the correct time for incoming calls, for

example.

Please note

To protect your phone and its system settings from unauthorised access, you can

define a 4-digit number code (system PIN) known only to yourself. This code must be

entered before you can register/de-register handsets or alter your phone's VoIP or

LAN settings.

The default system PIN is 0000 (4 x zero).

For instructions on changing the PIN

£ page 77.

07:15

INT 1 14 Oct

Calls Calendar