Operation Manual

Making calls

Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012

Version 5, 23.09.2008

Selecting a line for each call

Prerequisite: "Sel. at each call" has been assigned to the handset instead of a send con-

nection (

£ page 81).

Enter the number and press the talk key. The list of all the phone's connec-

tions is displayed.

Select a line.

§Dial§/

Press the display key or the middle of the control key.

If a dialling plan has been defined for the dialled phone number (£ page 102), then the

send connection specified in the dialling plan is used.

Using an alternative connection/connection list on the display key

Prerequisite: You have assigned an "alternative connection" or the list with all configured

connections to a display key on the handset (

£ page 76).

§Sel. Line§ Press the display key.

Select a line.

/§Dial§ Press the talk key or display key.

Enter a number. The number is dialled approximately 3.5 seconds after the

last digit is entered.

Any dialling plan (

£ page 102) that has been defined for the dialled phone number is

ignored. The selected send connection is always used.

Calling an IP address (provider-dependent)

You can also dial an IP address instead of a phone number.

¤ Press the star key

to separate the sections of the IP address

(e.g. 149*246*122*28).

¤ If necessary, press the hash

key to attach the SIP port number of the person you

are calling to the IP address (e.g. 149*246*122*28#5060).

If your VoIP provider does not support the dialling of IP addresses, each part of the

address will be interpreted as a normal phone number.

Please note

u You can cancel the dialling process with the end call key

u You are shown the duration of the call while the call is in progress.

u Dialling using the directories or the handset's call and redial lists saves you retyp-

ing numbers.

u If you have multiple handsets registered to the base, you can make internal calls

free of charge (page 71).