Operation Manual
37
Making calls
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / telephony.fm / 26.04.2012
Version 5, 23.09.2008
Displaying the phone number you are calling (COLP)
Prerequisites:
u Your network provider supports COLP (Connected Line Identification Presentation).
You may need to activate COLP with the provider (ask your provider about this).
u The called party has not activated COLR (Connected Line Identification Restriction).
For outgoing calls, the phone number of the connection on which the call is received is
displayed on the handset.
The displayed number may differ from the number you have dialled. Examples:
u The called party has activated call divert.
u The call is answered by another connection within a PABX system.
If there is an entry in the directory for this phone number, the corresponding name will
be displayed.
Ending a call
a
Press the end call key.
Accepting a call
An incoming call is indicated on a Gigaset handset in three ways: by ringing, by a display
on the screen and by the talk speaker key
c
.
You can accept the call on the handset by:
¤ Pressing the talk key
c
.
¤ Pressing the speaker key
d
.
¤ To deactivate the ringtone, press the §Silence§ display key. You can accept the call as long
as it is displayed on the screen.
If you press the end call key
a
, the call is rejected.
Please note
u The actual number of the connection you have reached (or the assigned name) is
displayed instead of the called number during call swapping, conference calls and
consultation calls.
u When the phone number is copied to the directory and the redial list, the dialled
number (not the displayed number) is copied.
Please note
Only calls to the receive connections assigned to the handset are signalled
(
£ page 82).
The following applies in particular if VoIP connections are configured on your base:
u If you have not assigned the receive connections on your phone, all incoming calls
are signalled on all registered handsets.
u If you have assigned connections but not assigned a connection to any handset as
the receive connection, calls on this connection will not be signalled.
If a call cannot be assigned to any connection on the phone, this call is signalled on
all handsets.