Operation Manual

Making calls using select services

Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012

Version 5, 23.09.2008

General call divert (CD)

A distinction is made between

u Diverting calls internally and

u Diverting calls to an external phone number

Diverting calls to an external connection (VoIP)

With call divert the call is diverted to another external connection. Your call divert settings

can be specific to a particular connection, i.e., for every connection that is assigned to the

handset as a receive connection.

Prerequisite: The VoIP provider supports call divert.

Select Services ¢ Call Divert

A list containing the configured and activated receive connections for your phone and

Internal is displayed.

¤ Select the receive connection for which you want to activate or deactivate call divert,

and press

§OK§.

¤ You can enter data in the following fields:

Status

Activate/deactivate call divert.

Phone Number

Enter the number to which the call is to be diverted. You can specify a different fixed

line, VoIP or mobile number for every connection.

When

Select All Calls/When Busy/No Answer.

All Calls: Calls are diverted immediately i.e., no more calls to this connection are sig-

nalled on your phone.

No Answer: Calls are diverted if no one accepts the call within several rings.

When Busy: Calls are diverted when your line is busy.

§Send§ Press the display key.

Diverting calls internally

You can divert all external calls intended for a receive connection on the handset to a dif-

ferent handset.

Select Services ¢ Call Divert

Internal Select and press §OK§.

¤ You can enter data in the following fields:

Activation

Activate/deactivate call divert.

To Handset

Select internal party.

No Handset is displayed if internal call divert has not been set previously or if the pre-

viously set handset is no longer registered.