Operation Manual

44
Making calls using select services
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / netservices.fm / 26.04.2012
Version 5, 23.09.2008
Configuring settings during an external call
Accepting a waiting call
You are making an external call and hear the call waiting tone.
§Accept§ Press the display key.
Once you have accepted the waiting call, you can switch between the two callers ("Call
swapping" £ page 45) or speak to both at the same time ("Conference" £ page 46).
Rejecting a waiting call
You can hear the call waiting tone but do not want to speak to the caller.
§Reject§ Press the display key.
The waiting caller hears the busy tone.
Please note
The services described below are only available if parallel IP connections are permit-
ted.
Please note
u Without CLIP, a waiting call is only announced with a signal tone.
u An internal waiting call is shown on the display. You can neither accept the internal
call nor reject it.
u For instructions on accepting a waiting external call during an internal call
£ page 73.
Please note
You can also press the end call key a to end the current call, and then press the talk
key
c again to accept the second call.