Operation Manual

65
Using the network mailbox
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / Net-AB.fm / 26.04.2012
Version 5, 23.09.2008
The list of VoIP connections that are assigned to the handset as receive connections is dis-
played. Net AM: xxx is displayed, where xxx is replaced by the respective default connec-
tion name (Net AM: IP1 to Net AM: IP6).
s Select entry and press §Select§ ( Ø =on).
If a number is already stored for this network mailbox, fast access is activated
immediately.
a Press and hold the end call key (idle status).
If no number is saved for the network mailbox, you are asked to enter the number of the
network mailbox.
s Jump to the Network Mailbox line.
~ Enter the number for the network mailbox.
§Save§ Press the display key.
a Press and hold the end call key (idle status).
Fast access is activated.
Calling the answering machine via fast access
 Press and hold.
If you have set a network mailbox for fast access, you are connected directly to this net-
work mailbox.
d If necessary, press the speaker key.
You hear the network mailbox announcement.
Displaying new messages in the handset's idle display
If a new message is present on one of the network mailboxes assigned to the handset via
its receive connection, or on the local answering machine, the symbol à and the
number of new messages are generally shown on the idle display. The f message key
flashes.
Please note
You can only assign fast access to one network mailbox.
You can also call the network mailbox for a handset's receive connections directly via
the message key (
£ page 66).