Operation Manual

71
Connecting/using handsets
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / HS_and_other_Devices.fm / 26.04.2012
Version 5, 23.09.2008
Ending paging
¤ Briefly press the registration/paging button on the base (£ page 3).
Or:
¤ Press the talk key c on the handset.
Or:
¤ Press the display key §Silence§ on the handset.
Or:
¤ Do not press any key on the base or handset:
After approx. 30 seconds, the paging call will end automatically.
Making internal calls
Internal calls to other handsets registered on the same base are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the handset.
Or:
u Initiate internal call.
s Select handset.
c Press the talk key.
You hear the busy tone if:
u There are already two internal connections.
u The handset being called is not available (deactivated, outside range).
u The internal call is not accepted within three minutes.
Calling all handsets ("group call")
u Press briefly to initiate an internal call.
* Press the star key.
Or
u Press briefly to initiate an internal call.
Call All Select and
c Press the talk key.
Or
u Press and hold.
All handsets are called.
Please note
u An incoming external call will not interrupt the paging process.
u If there are already two internal connections between the handsets, then paging is
not possible.
u A paging call is also signalled acoustically on handsets where the ringtone is perma-
nently deactivated.