Operation Manual

77
Configuring the system settings
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012
Version 5, 23.09.2008
Protecting the telephone from unauthorised access
Protect the phone system settings with a system PIN known only to you. You have to enter
the system PIN if you register or de-register a handset, change local network settings, per-
form a firmware update or reset the phone to default settings.
Changing the system PIN
You can change the phone's 4-digit system PIN (default setting: 0000) to a 4-digit PIN
known only by you.
v
¢
Ï
Settings
¢ System ¢ System PIN
~ If the current system PIN is not 0000:
Enter the current system PIN and press
§OK§.
~ Enter new system PIN.
§OK§ Press the display key.
Setting your own area code
Your area code (international and local area code) must be saved on the phone before you
can transfer phone numbers (e.g., in vCards).
Some of these numbers are already preset.
v
¢
Ï
Settings ¢ Te lephony ¢ Area Codes
Check that the (pre)set area code is correct.
¤ You can enter data in the following fields:
q Select/change input field.
r Navigate in the input field.
Ñ If necessary, delete number: press the display key.
~ Enter number.
§Save§ Press the display key.
Example:
•
Area Codes
International code:
00 - 4
Local area code:
0 - [ ]
Û Save