Operation Manual
78
Configuring the system settings
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012
Version 5, 23.09.2008
Activating/deactivating music on hold
v ¢
Ï
Settings ¢ Audio Settings ¢ Music on hold
Press §Change§ to activate or deactivate the music on hold (³ = on).
Setting the base's IP address in the LAN
Prerequisite: Your base is connected to a router or a PC (£ page 10).
An IP address is required in order for the LAN to "recognise" your phone.
The IP address can be assigned to the phone automatically (by the router) or manually.
u If done dynamically, the router's DHCP server automatically assigns an IP address to
the phone. The base's IP address can be changed according to router settings.
u With manual/static assignment, you assign a static IP address to the phone. This may
be necessary depending on your network configuration (e.g., if your phone is con-
nected directly to a PC).
v
¢ ÏSettings ¢ System ¢ Local Network
~ If the system PIN is not 0000: enter the system PIN and press §OK§.
¤ You can enter data in the following fields:
IP Address Type
Select Static or Dynamic.
For IP Address Type Dynamic:
The following fields show the current settings that the phone obtained from the
router. These settings cannot be changed.
For IP Address Type Static:
You must manually define the IP address and the subnet mask for the phone as well as
the default gateway and DNS server in the following fields.
For IP Address Type Static:
IP Address
Enter the IP address that is to be assigned to the phone (overwriting the current set-
tings).
The default is 192.168.1.2.
For information on the IP address, see the glossary (
£ page 127).
Subnet Mask
Enter the subnet mask to be assigned to the phone (overwriting the current settings).
The default setting is 255.255.255.0
For information on the subnet mask, see the glossary (
£ page 132).
•
Please note
To assign the IP address dynamically, the DHCP server on the router must be activated.
Please also read the user manual for your router.