Operation Manual

80
Configuring the system settings
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012
Version 5, 23.09.2008
Configuring VoIP connections
You can configure up to six VoIP connections on your telephone, i.e., you can assign up to
six VoIP phone numbers to your phone.
You need to set up an IP account (VoIP account) with a VoIP provider for each connection.
You must save the access data for this IP account on your phone. The IP wizard will help
you to do this.
Launching the IP wizard:
v ¢ Ï Settings ¢ Telephony ¢ VoIP Wizard
You will see the following in the display:
The procedure for the IP wizard is described on page 18.
Each time you run the IP wizard you can configure/reconfigure one VoIP connection (IP
account).
¤ Restart the IP wizard if you wish to configure/reconfigure another VoIP connection.
Automatic update for the VoIP provider settings
After the first download of the VoIP provider settings, your phone will check daily whether
a newer version of the file for your VoIP provider is available from the Internet on the con-
figuration server.
Auto configuration has been used to download VoIP settings (£ page 17)
If there is new configuration data, this is automatically downloaded to your phone (with-
out notification).
Manual VoIP configuration with the VoIP wizard
If there is new provider data, the idle display on the handset displays the message New
profile available.
§Yes§ Press the display key to confirm the prompt.
~ Enter the system PIN if necessary and press §OK§.
Please note
You can also use the Web configurator to configure and manage VoIP connections
(
£ page 99).
IP Wizard
?
Start IP
installation wizard?
No Yes