Operation Manual

84
Configuring the system settings
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / settings.fm / 26.04.2012
Version 5, 23.09.2008
Resetting the base to the default settings
The individual settings are reset.
Resetting the base via the menu
When the settings are restored:
u Handsets are still registered
u The system PIN is not reset.
The following settings in particular are reset to the default settings (you can change the
settings marked "*" via the Web configurator):
u The entered VoIP connections (are deleted)
u The assignment of send and receive connections
u Audio settings for VoIP connections *
u DTMF settings *
u Own area code
u Settings for the local network
u The names of the handsets
u Eco Mode and Eco Mode+ are deactivated
u PABX connection settings
u Digit and display key assignments as well as the  key
u Settings for select services: call divert
Call lists are deleted.
v
¢
Ï
Settings ¢ System ¢ Base Reset
~ Enter the system PIN and press §OK§.
§Yes§ Press the display key.
After the reset, the base is restarted. The restart takes around ten seconds.
The installation wizard is launched (
£ page 16).