Operation Manual

89
Configuring the phone via the Web configurator
Gigaset N510 IP PRO / engbt / A31008-M2217-R101-4-7619 / web-conf.fm / 26.04.2012
Version 5, 23.09.2008
Logging into/off the Web configurator
Prerequisite: Your PC and phone are connected to the Internet.
Logging in, setting the interface language
Once you have successfully established the connection, the Login Web page is displayed
in the Web browser.
You can select the language you want the menus and Web configurator dialogs to be dis-
played in. The language that is currently selected is displayed in the first field on the Web
page.
¤ If necessary, click to open the list of available languages.
¤ Select the language.
The Web page is reloaded in the selected language. Reloading may take some time.
¤ Enter your phone's system PIN (default setting: 0000) in the bottom field of the Web
page to access the Web configurator functions.
¤ Click OK.
Once you have successfully logged in, the Home Web page opens with general informa-
tion on the Web configurator.
If you enter an incorrect system PIN, a corresponding message is displayed. You are
prompted to re-enter the PIN.
If you enter an incorrect system PIN a second time, the PIN field is blocked for a short time
(greyed out). The duration of the block will double each time a PIN is subsequently
entered incorrectly.
Please note
The Web configurator Web pages for the required language are loaded onto the base
from the configuration server. For this reason, you can only change the language if
your device is connected to the Internet.
V