User's Manual
Table Of Contents
- RMT Manual 4-11-06 - DKP.pdf
- 1. GENERAL SAFETY INFORMATION
- 2. INTRODUCTION
- 5. FRONT PANEL CONTROLS
- 6. REAR PANEL CONNECTIONS
- 7. CIRCUIT DESCRIPTIONS
- 8. CONFIGURING THE TRANSMITTER
- 9. PREPARING FOR OPERATION
- 10. System Remote Monitoring and Setup
- Appendix A
- Appendix B
- RFX-RMTC Manual 011907.pdf
RFX-RMT Issue 1.1 Page 11 of 38
6. REAR PANEL CONNECTIONS
Rear Panel view of RFX-RMT showing all connections
6.1.1a Video for Digital Transmit Section (BNC connectors)
Connectors for either SDI digital, composite Analog or component Analog (Y/C or YUV)
video or ASI transport stream. Selected via front panel keypad.
75Ω BNC connectors (female)
6.1.1b Video for Analog Transmit Section (BNC connector)
Connector for composite video input.
75Ω BNC connector (female)
6.1.2 Analog Audio for Digital Transmit Section (XLR connectors)
Line / Mic Hi Z
The four channels of Analog audio are connected via four 3pin XLR Female connectors.
The connectors are designated Ch1, Ch2, Ch3, and Ch4. These inputs can be
independently selected for Line or Mic level inputs with adjustable gain, via the front panel
keypad
Pin
1 Analog Ground
2 Ch1/ A / Left +
3 Ch1/ A / Left -