User's Manual
Table Of Contents
- RMT Manual 4-11-06 - DKP.pdf
- 1. GENERAL SAFETY INFORMATION
- 2. INTRODUCTION
- 5. FRONT PANEL CONTROLS
- 6. REAR PANEL CONNECTIONS
- 7. CIRCUIT DESCRIPTIONS
- 8. CONFIGURING THE TRANSMITTER
- 9. PREPARING FOR OPERATION
- 10. System Remote Monitoring and Setup
- Appendix A
- Appendix B
- RFX-RMTC Manual 011907.pdf
RFX-RMT Issue 1.1 Page 13 of 38
6.1.7 User data (future option)
Connector Type: 7 pin LEMO connector EGG.1B.307.CLN
User data selectable as RS485 or RS232
(future option)
RS232 CONNECTIONS RS485 CONNECTIONS
Pin
1 Not Used Not Used
2 Not Used Not Used
3 User Data User Data (-)
4 Not Used Not Used
5 Ground Ground
6 Not Used Not Used
7 Not Used User Data (+)
6.1.8 Remote Monitoring and Control (future option)
Connector Type: 9-way ‘D’ type, female
Remote Control and Monitoring interface selectable as RS485 or RS232
(Future option)
RS232 CONNECTIONS RS485 CONNECTIONS
Pin Direction Direction
1 Not Used Not Used
2 Data Tx Out from Unit Data Tx (-) Out from Unit
3 Data Rx Into Unit Data Rx (-) Into Unit
4 Not Used Not Used
5 Ground Ground
6 Not Used Data Tx (+) Out from Unit
7 Not Used Data Rx (+) Into Unit
8 Not Used Not Used
9 Not Used Not Used