User's Manual
Table Of Contents
- RMT Manual 4-11-06 - DKP.pdf
- 1. GENERAL SAFETY INFORMATION
- 2. INTRODUCTION
- 5. FRONT PANEL CONTROLS
- 6. REAR PANEL CONNECTIONS
- 7. CIRCUIT DESCRIPTIONS
- 8. CONFIGURING THE TRANSMITTER
- 9. PREPARING FOR OPERATION
- 10. System Remote Monitoring and Setup
- Appendix A
- Appendix B
- RFX-RMTC Manual 011907.pdf
RFX-RMT Issue 1.1 Page 9 of 38
5. Power Amplifier. This module accepts the Analog or digital RF signal at a level of
–10dBm (nominal) and amplifies the signal to a level of 500mW (+27dBm) nominal.
6. Analog transmitter module. This module accepts an Analog composite video
signal (NTSV) plus up to 2x Analog audio signals (line level) and uses conventional
FM modulation techniques to produce an RF signal complete with audio sub-
carriers at the required RF frequency.
7. Front panel module. This module contains a microprocessor plus six push buttons
and an LCD display for overall monitoring and control of the RFX-RMT transmitter.