User's Manual

CHAPTER 3 POCKET PC 2002 DRIVER
INSTALLATION & REMOVAL
This chapter covers the steps you need to take to install the card and its drivers.
It also covers the procedure on how to remove the drivers, if desired.
Step 1 (optional) Card validation and mobile computer functionality check
• This step checks whether the
GigaWaveTech Bluetooth CF
card can be detected by
PPC/PPC2002.
• Turn on the mobile computer
and wait until all the startup
procedures are completed.
• Plug in the CF card into an
empty slot. Ensure that it is
inserted face-up and in the
direction of the arrow.
• A dialog box should pop-up
indicating an unrecognized
card as shown on the right.
• Click on “Cancel”, and then
unplug the CF card.
• You have just validated the
card and socket functionality.
Step 2 Preparing for Driver installation
• You will need to setup a prior communication channel to the mobile
computer, e.g. a USB connection.