User's Manual

CHAPTER 6: USEAGE & SAFETY
CONSIDERATIONS
Please read this section before using your card
Care for your CF card
• Keep product within operating and storage temperature ranges
• Keep product away from liquids, moisture or extremes in humidity.
• Keep product away from lit candles, cigarettes, open flames and volatile solvents.
• The CF Card is a precision product, do not drop, bend or subject to rough treatment.
Keep it in a clean and dust-free environment.
• Do no apply stickers and/or paint the card. These can prevent proper insertion and
operation.
• This card contains an antenna. Do not place a metallic shield over it, as this will reduce
the radio’s transmission efficiency.
• There are no user-serviceable parts within the card. Do not attempt to dissemble the
card. Please contact us at [e-mail] if the card fails to work properly.
• Use of this card is subject to national and local regulations. Please check for any
exceptions, due to national requirements or limitations, with respect to Bluetooth
equipment, before using this card.
• Modifications without the written permission of GigaWaveTech (Pte) Ltd may void your
authority to operate this card.
Use in a car
• Always give full attention to driving and pull off the road and park before using any
equipment, if driving conditions require.
• This card emits Radio Frequency energy, which may affect operation of some car
electronic systems. Check with your vehicle’s manufacturer’s representative to be sure
that the systems are compatible with Bluetooth equipment.
Use in aircraft
• Turn off all your Bluetooth equipment before boarding any aircraft. For this card, ensure
that the LED is off.
• To prevent interference with the aircraft communications and navigation systems, do not
operate your Bluetooth equipment while you are onboard the aircraft, even when the
aircraft is on the ground and stationary.
• If in doubt, please seek permission from the crew.
Other electronic equipment
• Most modern electronic equipment is shielded from RF energy, however, certain
electronic equipment may not be, therefore do not use your Bluetooth equipment near
medical equipment without requesting prior permission
Use in areas where transmitting devices are prohibited e.g. Blasting areas
or potentially explosive atmospheres
• Certain places may restrict the use of transmitting devices, for safety purposes. Please
observe such restrictions by turning off your Bluetooth equipment. For this card, ensure
that the LED is off.
Radio Frequency (RF) exposure
• Your Bluetooth card is a radio transmitter and receiver. When in use, it communicates
with a Bluetooth-equipped device by transmitting and receiving radio frequency