Installation Guide
Table Of Contents
8
MACHINE OPERATIONS
Operation Panel
Quick introduction
1. Connect and turn on the water faucet before power the machine.
2. Turn on the machine,it start to replenish water with lighted”adding water” and “lack of
water”,after finishing,it will enter to standby mode with “00”displayed in the screen. At the
same time,”adding water” and “lack of water” will be off.
3.
ON/OFF SWITCH
Press to make ice,and hold for 2s to turn it off.
4.
Hold for 2s to force the ice cubes fall from the evaporator ahead of time.
5.
When the machine is in standby mode, press the “Cleaning” button to make the machine
automatically enter self-cleanprogram for 5 min.
6.
A: When the machine is at the middle of ice making, press the“Reservation/+” button to
5
The
placement
of
the
machine
a)
Find
a
location
for
your
ice
maker
where
it’s
protected
from
direct
sunlight
and
other
sources
of
heat
(i.e.
stove,
furnace,
radiator).
Place
the
ice
maker
on
a
level
surface.
Make
sure
that
there
is
at
least
5
inches
of
space
between
the
back
and
sides
of
your
ice
maker
and
the
wall.
b)
The
ambient
temperature
around
the
machine
should
not
be
lower
than
3℃(37.4ºF),not
higher
than
40℃(104ºF),
ensure
there
is
at
least
19.7in
of
space
between
the
back
and
sides
of
your
unit
and
the
wall.
c)
The
machine
should
be
placed
on
a
stable
place.
d)
Please
do
not
put
anything
on
top
of
the
machine.
e)
After
you
unpack
the
machine,
we
recommend
you
to
leaving
it
for
24
hours
before
turning
it
on.
f)
Clean
the
interior
with
lukewarm
water
and
a
soft
cloth
or
clean
the
unit
using
the
Self-
Clean
function.
g)The
appliance
must
be
positioned
where
the
plug
is
accessible.
Installation
and
connection
NOTE:
Installation
must
be
operated
according
to
the
manual
by
a
professional.
If
you
have
any
questions
about
the
installation
and
connection,
we
can
send
the
tutorial
video
to
you,
pls
contact
us:
Support
email:support221@163.com
Phone
number:(213)516-2282
Water
connection
of
the
machine
Warning:
a.The
ice
machine
can
only
be
connected
to
a
drinking
water
source,
and
the
water
source
must
comply
with
local
drinking
water
standards.
b.The
water
supply
to
the
ice
maker
must
be
connected
to
a
filter
to
improve
the
drinking
standard
of
the
water.
Please
do
not
directly
connect
to
tap
water.
c.
The
water
supply
pressure
should
be
within
14.5-58psi,
if
the
pressure
is
greater
than
58psi,
a
pressure
reducing
valve
needs
to
be
connected.
d.
The
machine
is
drained
by
its
own
weight,
so
the
drain
pipe
should
have
sufficient
height.