User Manual

MDE-4199 Contactless Smart Card Retrofit Kit M05205K00X Installation Manual • January 2005 Page 11
Installation
Installing the Antenna PCA
The RF antenna must be located directly behind the area where the PayPass logo graphic is
attached as shown in Figure 4.
Figure 4: Encore CIM Door Showing Antenna PCA Location
Install the antenna as follows:
1 Locate the area where the antenna PCA will be mounted.
2 Using isopropyl alcohol, clean the mounting surface.
3 Locate the M05170A001 Antenna PCA in the kit and peel the protective cover from the foam
adhesive strips on the antenna.
4 Orient the antenna as shown in Figure 4 and attach it to the CIM door surface by pressing the
foam adhesive firmly against the CIM door.
5 Using two Q11657-290 screws (part of the kit), secure the antenna in place by inserting the
screws in the mounting holes (Figure 4) and turning the self-tapping screws into the CIM door.
6 Connect one end of the M04124A003 Antenna Cable to the two-pin connector on the antenna
PCA (Figure 4) and the other end to the 2-pin connector on the dual head card assembly as
shown in Figure 2.
M05170A001 Antenna PCA
PayPass Logo
Location
Front View
Rear View
Mounting Holes
2 Pin Connector